Prioritizing of the Internet of Manufacturing Things (IoMT) Challenges in Automotive Industry by Using Interpretive Structural Modeling (ISM)

Journal of Systems Thinking in Practice

مقاله 4، دوره 2، شماره 4 - شماره پیاپی 7، اسفند 2023، صفحه 57-77   

نوع مقاله: Research Article

شناسه دیجیتال (DOI): 10.22067/jstinp.2023.85639.1080

نویسندگان

Sahar Valipour Parkouhi^* ؛ Abdolhamid Safaei Ghadikolaei؛ Hamidreza Fallah Lajimi

Department of Industrial Management, Faculty of Economics and Administrative Sciences, University of Mazandaran, Mazandaran. Iran.

چکیده

Smart manufacturing can be referred to as an important consequence of the Fourth Industrial Revolution. With the advent of this revolution, manufacturing companies must use numerous new technologies to become smart. Companies face multifaceted challenges because of these new technologies. The Internet of Things (IoT) technology is one of the achievements of Industry 4.0, which plays an important role in implementing smart manufacturing. IoT used in smart manufacturing is called the Internet of Manufacturing Things (IoMT Like other technologies, IoMT has its challenges. Therefore, manufacturing organizations must be able to identify these challenges and concentrate on them based on their priority. This study identified the challenges of using the Internet of Things in smart manufacturing were identified by reviewing the literature. The Interpretive Structural Modeling (ISM) technique was used to prioritize challenges in the automotive industry. Based on the research findings, the challenges were classified into three levels. This leveling provides a suitable model for automotive industry managers prioritize their strategies and actions accordingly.

کلیدواژه‌ها

Smart manufacturing؛ Internet of things؛ Internet of Manufacturing Things؛ Challenges؛ Interpretive Structural Modeling

مراجع

Afzal, B., Umair, M., Shah, G.A. and Ahmed, E., 2019. Enabling IoT platforms for social IoT applications: Vision, feature mapping, and challenges. Future Generation Computer Systems, 92, pp.718-731. https://doi.org/10.1016/j.future.2017.12.002.

Agarwal, A., Shankar, R. and Tiwari, M.K., 2007. Modeling agility of supply chain. Industrial marketing management, 36(4), pp.443-457. https://doi.org/10.1016/j.indmarman.2005.12.004.

Ali, S., Baseer, S., Abbasi, I.A., Alouffi, B., Alosaimi, W. and Huang, J., 2022. Analyzing the interactions among factors affecting cloud adoption for software testing: a two-stage ISM-ANN approach. Soft Computing, 26(16), pp.8047-8075. https://doi.org/10.1007/s00500-022-07062-3.

Bi, Z., Da Xu, L. and Wang, C., 2014. Internet of things for enterprise systems of modern manufacturing. IEEE Transactions on industrial informatics, 10(2), pp.1537-1546. https://doi.org/10.1109/TII.2014.2300338.

Bolaños, R., Fontela, E., Nenclares, A. and Pastor, P., 2005. Using interpretive structural modelling in strategic decision‐making groups. Management Decision, 43(6), pp.877-895. https://doi.org/10.1108/00251740510603619.

Chand, P., Thakkar, J.J. and Ghosh, K.K., 2020. Analysis of supply chain sustainability with supply chain complexity, inter-relationship study using delphi and interpretive structural modeling for Indian mining and earthmoving machinery industry. Resources Policy, 68, p.101726. https://doi.org/10.1016/j.resourpol.2020.101726.

Chen, S., Xu, H., Liu, D., Hu, B. and Wang, H., 2014. A vision of IoT: Applications, challenges, and opportunities with china perspective. IEEE Internet of Things journal, 1(4), pp.349-359. https://doi.org/10.1109/JIOT.2014.2337336.

Choudhary, T., Virmani, C. and Juneja, D., 2020. Convergence of Blockchain and IoT: An Edge Over Technologies. Toward Social Internet of Things (SIoT): Enabling Technologies, Architectures and Applications: Emerging Technologies for Connected and Smart Social Objects, pp.299-316. https://doi.org/10.1007/978-3-030-24513-9_17.

Cooper, J. and James, A., 2009. Challenges for database management in the internet of things. IETE Technical Review, 26(5), pp.320-329. https://doi.org/10.4103/0256-4602.55275.

Dorsemaine, B., Gaulier, J.P., Wary, J.P., Kheir, N. and Urien, P., 2015, September. Internet of things: a definition & taxonomy. In 2015 9th International Conference on Next Generation Mobile Applications, Services and Technologies (pp. 72-77). IEEE. 10.1109/NGMAST.2015.71.

Dhumale, R.B., Thombare, N.D. and Bangare, P.M., 2017. Supply Chain Management using Internet of Things.

Ebrahimi, M., Baboli, A. and Rother, E., 2019. The evolution of world class manufacturing toward Industry 4.0: A case study in the automotive industry. Ifac-Papersonline, 52(10), pp.188-194. https://doi.org/10.1016/j.ifacol.2019.10.021.

Edgar, T.F. and Pistikopoulos, E.N., 2018. Smart manufacturing and energy systems. Computers & Chemical Engineering, 114, pp.130-144. https://doi.org/10.1016/j.compchemeng.2017.10.027.

Farahani, B., Firouzi, F., Chang, V., Badaroglu, M., Constant, N. and Mankodiya, K., 2018. Towards fog-driven IoT eHealth: Promises and challenges of IoT in medicine and healthcare. Future generation computer systems, 78, pp.659-676. https://doi.org/10.1016/j.future.2017.04.036.

Guan, L., Abbasi, A. and Ryan, M.J., 2020. Analyzing green building project risk interdependencies using Interpretive Structural Modeling. Journal of cleaner production, 256, p.120372. https://doi.org/10.1016/j.jclepro.2020.120372.

Hristov, K., 2017. Internet plus policy: A study on how China can achieve economic growth through the internet of things. Journal of Science and Technology Policy Management, 8(3), pp.375-386. https://doi.org/10.1108/JSTPM-03-2017-0007.

Kaswan, M.S. and Rathi, R., 2019. Analysis and modeling the enablers of green lean six sigma implementation using interpretive structural modeling. Journal of cleaner production, 231, pp.1182-1191. https://doi.org/10.1016/j.jclepro.2019.05.253.

Kaur, B., Dadkhah, S., Shoeleh, F., Neto, E.C.P., Xiong, P., Iqbal, S., Lamontagne, P., Ray, S. and Ghorbani, A.A., 2023. Internet of things (IoT) security dataset evolution: Challenges and future directions. Internet of Things, p.100780. https://doi.org/10.1016/j.iot.2023.100780.

Khan, A. and Turowski, K., 2016. A survey of current challenges in manufacturing industry and preparation for industry 4.0. In Proceedings of the First International Scientific Conference “Intelligent Information Technologies for Industry”(IITI’16) Volume 1 (pp. 15-26). Springer International Publishing. https://doi.org/10.1007/978-3-319-33609-1_2.

Khan, M.A. and Salah, K., 2018. IoT security: Review, blockchain solutions, and open challenges. Future generation computer systems, 82, pp.395-411. https://doi.org/10.1016/j.future.2017.11.022.

Khan, S., Khan, M.I. and Haleem, A., 2020. Prioritisation of challenges towards development of smart manufacturing using bwm method. Internet of Things (IoT) Concepts and Applications, pp.409-426. https://doi.org/10.1007/978-3-030-37468-6_22.

Kouicem, D.E., Bouabdallah, A. and Lakhlef, H., 2018. Internet of things security: A top-down survey. Computer Networks, 141, pp.199-221. https://doi.org/10.1016/j.comnet.2018.03.012.

Krasniqi, X. and Hajrizi, E., 2016. Use of IoT technology to drive the automotive industry from connected to full autonomous vehicles. IFAC-PapersOnLine, 49(29), pp.269-274. https://doi.org/10.1016/j.ifacol.2016.11.078.

Kumar, N.M. and Mallick, P.K., 2018. Blockchain technology for security issues and challenges in IoT. Procedia computer science, 132, pp.1815-1823. https://doi.org/10.1016/j.procs.2018.05.140.

Kumar, V., Vrat, P. and Shankar, R., 2021. Prioritization of strategies to overcome the barriers in Industry 4.0: a hybrid MCDM approach. Opsearch, pp.1-40. https://doi.org/10.1007/s12597-020-00505-1.

Lanotte, R. and Merro, M., 2018. A semantic theory of the Internet of Things. Information and Computation, 259, pp.72-101. https://doi.org/10.1016/j.ic.2018.01.001.

Lee, G.M., Crespi, N., Choi, J.K. and Boussard, M., 2013. Internet of things. Evolution of Telecommunication Services: The Convergence of Telecom and Internet: Technologies and Ecosystems, pp.257-282. https://doi.org/10.1007/978-3-642-41569-2_13.

Lee, I. and Lee, K., 2015. The Internet of Things (IoT): Applications, investments, and challenges for enterprises. Business horizons, 58(4), pp.431-440. https://doi.org/10.1016/j.bushor.2015.03.008.

Li, S., Chen, W., Hu, J. and Hu, J., 2018. ASPIE: a framework for active sensing and processing of complex events in the internet of manufacturing things. Sustainability, 10(3), p.692. https://doi.org/10.3390/su10030692.

Lim, C., Kim, K.J. and Maglio, P.P., 2018. Smart cities with big data: Reference models, challenges, and considerations. Cities, 82, pp.86-99. https://doi.org/10.1016/j.cities.2018.04.011.

Liu, J., Xiao, Y., Li, S., Liang, W. and Chen, C.P., 2012. Cyber security and privacy issues in smart grids. IEEE Communications surveys & tutorials, 14(4), pp.981-997. https://doi.org/10.1109/SURV.2011.122111.00145.

Luthra, S. and Mangla, S.K., 2018. Evaluating challenges to Industry 4.0 initiatives for supply chain sustainability in emerging economies. Process Safety and Environmental Protection, 117, pp.168-179. https://doi.org/10.1016/j.psep.2018.04.018.

Makhdoom, I., Abolhasan, M., Abbas, H. and Ni, W., 2019. Blockchain's adoption in IoT: The challenges, and a way forward. Journal of Network and Computer Applications, 125, pp.251-279. https://doi.org/10.1016/j.jnca.2018.10.019.

Mazhar, T., Irfan, H.M., Haq, I., Ullah, I., Ashraf, M., Shloul, T.A., Ghadi, Y.Y., Imran and Elkamchouchi, D.H., 2023. Analysis of Challenges and Solutions of IoT in Smart Grids Using AI and Machine Learning Techniques: A Review. Electronics, 12(1), p.242. https://doi.org/10.3390/electronics12010242.

Mohammadzadeh, A.K., Ghafoori, S., Mohammadian, A., Mohammadkazemi, R., Mahbanooei, B. and Ghasemi, R., 2018. A Fuzzy Analytic Network Process (FANP) approach for prioritizing internet of things challenges in Iran. Technology in Society, 53, pp.124-134. https://doi.org/10.1016/j.techsoc.2018.01.007.

Nasrollahi, M. and Ramezani, J., 2020. A model to evaluate the organizational readiness for big data adoption. International Journal of Computers, Communications and Control, 15(3). https://doi.org/10.15837/IJCCC.2020.3.3874.

Reyna, A., Martín, C., Chen, J., Soler, E. and Díaz, M., 2018. On blockchain and its integration with IoT. Challenges and opportunities. Future generation computer systems, 88, pp.173-190. https://doi.org/10.1016/j.future.2018.05.046.

Rose, K.A., Sable, S., DeAngelis, D.L., Yurek, S., Trexler, J.C., Graf, W. and Reed, D.J., 2015. Proposed best modeling practices for assessing the effects of ecosystem restoration on fish. Ecological Modelling, 300, pp.12-29. https://doi.org/10.1016/j.ecolmodel.2014.12.020.

Satyavolu, P., Setlur, B., Thomas, P. and Iyer, G., 2015. Designing for manufacturing’s ‘internet of things’. Technology solutions, pp.4-14.

Werlinger, R., Hawkey, K. and Beznosov, K., 2009. An integrated view of human, organizational, and technological challenges of IT security management. Information Management & Computer Security, 17(1), pp.4-19. https://doi.org/10.1108/09685220910944722.

Xu, X. and Zou, P.X., 2020. Analysis of factors and their hierarchical relationships influencing building energy performance using interpretive structural modelling (ISM) approach. Journal of Cleaner Production, 272, p.122650. https://doi.org/10.1016/j.jclepro.2020.122650.

Xu, Y., de Souza, R.W., Medeiros, E.P., Jain, N., Zhang, L., Passos, L.A. and de Albuquerque, V.H.C., 2023. Intelligent IoT security monitoring based on fuzzy optimum-path forest classifier. Soft Computing, 27(7), pp.4279-4288. https://doi.org/10.1007/s00500-022-07350-y.

Yang, Z. and Lin, Y., 2020. The effects of supply chain collaboration on green innovation performance: An interpretive structural modeling analysis. Sustainable Production and Consumption, 23, pp.1-10. https://doi.org/10.1016/j.spc.2020.03.010.

Zhang, Y., Wang, W., Liu, S. and Xie, G., 2014. Real-time shop-floor production performance analysis method for the internet of manufacturing things. Advances in Mechanical Engineering, 6, p.270749.https://doi.org/10.1155/2014/270749.