Finite element analysis for microscale heat equation with Neumann boundary conditions

Iranian Journal of Numerical Analysis and Optimization

مقاله 7، دوره 14، Issue 3 - شماره پیاپی 30، آذر 2024، صفحه 796-832   

نوع مقاله: Research Article

شناسه دیجیتال (DOI): 10.22067/ijnao.2024.87084.1403

نویسندگان

M.H. Hashim؛ A.J. Harfash^*

Department of Mathematics, College of Sciences, University of Basrah, Basrah, Iraq.

چکیده

In this paper, we explore the numerical analysis of the microscale heat equation. We present the characteristics of numerical solutions obtained through both semi- and fully-discrete linear finite element methods. We establish a priori estimates and error bounds for both semi-discrete and fully-discrete finite element approximations. Additionally, the existence and uniqueness of the semi-discrete and fully-discrete finite element ap-proximations have been confirmed. The study explores error bounds in various spaces, comparing the semi-discrete to the exact solutions, the semi-discrete against the fully-discrete solutions, and the fully-discrete solutions with the exact ones. A practical algorithm is introduced to address the sys-tem emerging from the fully-discrete finite element approximation at every time step. Additionally, the paper presents numerical error calculations to further demonstrate and validate the results.

کلیدواژه‌ها

Finite element؛ Microscale heat equation؛ Convergence؛ Weak solution

مراجع

[1] Abbaszadeh, M. and Dehghan, M. Investigation of heat transport equa-tion at the microscale via interpolating element-free Galerkin method, Eng. Comput. 38(Suppl 4) (2022), 3317–3333.
[2] Al-Juaifri, G.A. and Harfash, A.J. Finite element analysis of nonlinear reaction–diffusion system of Fitzhugh–Nagumo type with Robin boundary conditions, Math. Comput. Simul. 203 (2023), 486–517.
[3] Al-Musawi, G.A. and Harfash, A.J. Finite element analysis of extended Fisher-Kolmogorov equation with Neumann boundary conditions, Appl. Numer. Math. 201 (2024), 41–71.
[4] Baharlouei, S., Mokhtari, R. and Chegini, N. Solving two-dimensional coupled burgers equations via a stable hybridized discontinuous Galerkin method, Iran. J. Num. Anal. Optim. 13(3) (2023), 397–425.
[5] Biazar, J. and Salehi, F. Chebyshev Galerkin method for integro-differential equations of the second kind, Iran. J. Num. Anal. Optim. 6(1) (2016), 31–43.
[6] Castro, MA. , Rodríguez F., Cabrera, J., and Martín, J.A. A compact difference scheme for numerical solutions of second order dual-phase-lagging models of microscale heat transfer, J. Comput. Appl. Math. 291 (2016), 432–440.

[7] Ciarlet, P.G. The finite element method for elliptic problems, SIAM, (2002).
[8] Ciavaldini, J.F. Analyse numerique d’un problème de Stefan à deux phases par une methode d’éléments finis, SIAM J. Num. Anal. 12(3) (1975), 464–487.
[9] Ern, A. and Guermond, J.L. Theory and practice of finite elements, Springer Science & Business Media, 159 (2004)
[10] Haghighi, D., Abbasbandy, S. and Shivanian, E. Applying the meshless fragile points method to solve the two-dimensional linear schrödinger equation on arbitrary domains, Iran. J. Num. Anal. Optim. 13(1) (2023), 1–18.
[11] Harfash, A.J. High accuracy finite difference scheme for three-dimensional microscale heat equation, J. Comput. Appl. Math. 220(1-2) (2008),335–346.
[12] Hashim, M.H. and Harfash, A.J. Finite element analysis of a Keller–Segel model with additional cross-diffusion and logistic source. part I: Space convergence, Comput. Math. with Appl. 89(1) (2021), 44–56.
[13] Hashim, M.H. and Harfash, A.J. Finite element analysis of a Keller-Segel model with additional cross-diffusion and logistic source. part II: Time convergence and numerical simulation, Comput. Math. with Appl. 109(1) (2022), 216–234.
[14] Hashim, M.H. and Harfash, A.J. Finite element analysis of attraction-repulsion chemotaxis system. Part I: Space convergence, Commun. Appl. Math. Comput. 4(3) (2022), 1011–1056.
[15] Hashim, M.H. and Harfash, A.J. Finite element analysis of attraction-repulsion chemotaxis system. Part II: Time convergence, error analysis and numerical results, Commun. Appl. Math. Comput. 4(3) (2022), 1057–1104.
[16] Hassan, S.M. and Harfash, A.J. Finite element analysis of a two-species chemotaxis system with two chemicals, Appl. Num. Math. 182 (2022), 148–175.

[17] Hassan, S.M. and Harfash, A.J. Finite element analysis of the two-competing-species Keller–Segel chemotaxis model, Comput. Math. Model. 33(4) (2022), 443–471.
[18] Hassan, S.M. and Harfash, A.J. Finite element approximation of a Keller–Segel model with additional self-and cross-diffusion terms and a logistic source, Commun. Nonlinear Sci. Num. Simul. 104 (2022), 106063.
[19] Hassan, S.M. and Harfash, A.J. Finite element analysis of chemotaxis-growth model with indirect attractant production and logistic source, Int. J. Comput. Math. 100(4) (2023), 745–774.
[20] Joseph, D.D. and Preziosi, L. Heat waves, Rev. Modern Phys. 61(1) (1989), 41.
[21] Joshi, A.A. and Majumdar, A. Transient ballistic and diffusive phonon heat transport in thin films, J. Appl. Phys. 74(1) (1993), 31–39.
[22] Nikan, O., Avazzadeh, Z., and Tenreiro Machado, J.A. Numerical treat-ment of microscale heat transfer processes arising in thin films of metals, Int. Commun. Heat Mass Transf. 132 (2022), 105892.
[23] Pajand, M.R., Moghaddam, N.G. and Ramezani, M.R. Review of the strain-based formulation for analysis of plane structures part ii: Evalu-ation of the numerical performance, Iran. J. Num. Anal. Optim. 11(2) (2021), 485–511.
[24] Qiu, T.Q. and Tien, C.L. Short-pulse laser heating on metals, Int. J. Heat Mass Transf. 35(3) (1992), 719–726.
[25] Qiu, T.Q. and Tien, C.L. Heat transf. mechanisms during short-pulse laser heating of metals, J. Heat Transf. 115(4) (1993), 835–841.
[26] Tzou, D.Y. Experimental support for the lagging behavior in heat prop-agation, J. Thermophys. Heat Transf. 9(4) (1995), 686–693.
[27] Tzou, D.Y. The generalized lagging response in small-scale and high-rate heating, Int. J. Heat Mass Transf. 38(17) (1995), 3231–3240.

[28] Tzou, D.Y. A unified field approach for heat conduction from macro-to micro-scales, J. Heat Transf. 117(1) (1995), 8–16.
[29] Yeganeh, S., Mokhtari, R. and Fouladi, S. Using a LDG method for solv-ing an inverse source problem of the time-fractional diffusion equation, Iran. J. Num. Anal. Optim. 7(2) (2017), 115–135.
[30] Youssri, Y.H. and Atta, A.G. Modal spectral Tchebyshev Petrov–Galerkin stratagem for the time-fractional nonlinear burgers’ equation, Iran. J. Num. Anal. Optim. 14(1) (2024), 172–199.
[31] Zhang, J. and Zhao, J.J. High accuracy stable numerical solution of 1D microscale heat transport equation, Comm. Num. Methods Eng. 17(11) (2001), 821–832.
[32] Zhang, J. and Zhao, J.J. Iterative solution and finite difference approxi-mations to 3d microscale heat transport equation, Math. Comput. Simul. 57(6) (2001), 387–404.
[33] Zhang, J. and Zhao, J.J. Unconditionally stable finite difference scheme and iterative solution of 2D microscale heat transport equation, J. Com-put. Phys. 170(1) (2001), 261–275.