Influential Factors in Pinch Effect and Energy Dissipation of the Kaiser Bolted Bracket Moment Connection

مهندسی عمران فردوسی

Article 6, Volume 26, Issue 1, February 2015, Pages 85-100   

Document Type: پژوهشی

DOI: 10.22067/civil.v26i1.44042

Authors

farhad Shahidi^* ; Fariborz Nateghi; Mehran Sayed Razzaghi; Farhood Shahidi

Abstract

In the aftermath of the 1994 Northridge, California, earthquake. A significant number of steel moment resisting structural systems were damaged. Many studies and researches have been conducted to improve the seismic performance of structures after the catastrophe. One of the proposed connections for special moment-resisting frames included AISC-358 is Kaiser bolted bracket moment connection, briefly named, KBB, this brackets produced as high steel cast. In this study, the seismic behavior of moment connection, KBB is examined under standard loading history and near-fault loading history according to ATC and FEMA codes. The results show that the connection has suitable seismic performance. But in beams with high depth due to the bracket rigidity, there is high lever force in top row bolts. Moreover use of Finger shims with variable thickness, reduce pre-tensioned force in bolts and increase pinch in hysteresis curve specimens.

Keywords

Standard loading history; Near-Fault loading history; Kaiser bolted bracket connection (KBB); Pinch

References

1. Scott M. Adan, William Gibb, "Experimental Evaluation of Kaiser Bolted Bracket Steel Moment-Resisting Connections", Engineering Journal, third quarter, pp. 181-196, (2009).

2. ANSI/AISC 358-10S11, "Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications", ANSI/AISC, Chicago, (2011).

3. Scott M. Adan, William Gibb. "Test Report 98-05-Specimen HH-8", ICF Kaiser Engineers, January 20, (1998).

4. ABAQUS version 6.10.1, "Manual of ABAQUS version 6.10.1", Hibbit Carlson & Sorensen Inc, (2010).

5. AISC, "Manual of steel construction-Load and resistance factor design", American Institute of Steel Construction, Chicago (IL), (1995).

6. ATC-24, "Guidelines for cyclic seismic testing of components of steel structures", Applied techology council, (1992).

7. FEMA-355D, "State of the art report on connection performance", Federal Emergency Management Agency, September, (2000).

8. RCSC, "Specification for Structural Joints Using High-Strength Bolts", Research Council on Structural Connections, December, (2009).

9. ANSI/AISC 360-05, "Specification for Structural Steel Buildings", American Institute of Steel Construction, Chicago, March, (2005).

10. SAC/BD-97/02 Version 1.1, "Protocol for Fabrication, Inspection, Testing, and Documentation of Beam-Column Connection Tests and Other Experimental Specimens", SAC report, (2002).

11. H. Krawinkler, A. Gupta, R. Medina, N. Luco, "Development of Loading Histories for Testing of Steel Beam-to-Column Assemblies", SAC report, August, (2000).