Development of Fatigue Predictive Models for Asphalt Concrete Mixes Containing Electric Arc Furnace Steel Slag Based on Fracture Energy Concept

مهندسی عمران فردوسی

Article 2, Volume 32, Issue 2 - Serial Number 26, May 2019, Pages 17-34   

Document Type: پژوهشی

DOI: 10.22067/civil.v32i2.66310

Authors

Morteza Jalili Qazizadeh¹; Amir Kavussi²; Aliasghar Sadeghi³; hamid farhad^{* 4}

¹Quchan University of Advanced Technology

²Tarbiat Modares University

³Hakim Sabzevari University

⁴University of Torbat Heydarieh

Abstract

This research was conducted in order to evaluate fatigue resistance properties of asphalt mixes containing Electric Arc Furnace (EAF) steel slag. After evaluating properties of EAF steel slag, five sets of mixes were prepared in laboratory. Each set consisted of a combination of a control limestone aggregate mixed with a specific amount of EAF steel slag. Four points bending beam fatigue testing was performed on all mixes (at strain controlled mode). Based on fatigue lives, fatigue predicting models were developed. Moreover, a fatigue prediction model which was obtained from indirect tensile test, resilient modulus and was based on fracture energy was developed. The results showed that the inclusion of EAF in mixes improved fatigue life of mixes considerably. Very good correlations were observed between responses and fatigue life of mixes. In addition, models based on fracture energy (DEf/DEIDT) predicted reasonably well fatigue life of mixes containing EAF materials

Keywords

Asphalt mixture; EAF slag; Fatigue model; Fracture Energy

Supplementary Files

2 Ghazizade-a .pdf

References

Shaopeng, W., Yongjie, X. and Qunshan Y., "Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures", Building and Environment, Vol. 42, pp. 2580–5, (2007).

Yongjie, X., Shaopeng, W., Haobo, H. and Jin, Z., "Experimental investigation of basic oxygen furnace slag used as aggregate in asphalt mixture", Journal of Hazardous Materials, Vol. 138, pp. 261–8, (2006).

Sofilić, T., Rastovčan-Mioč, A., Ćosić, M., Merle, V., Mioč, B. and Sofilić, U., "EAF steel slag application possibilities in croatian asphalt mixture production” Chemical Engineering Transactions, Vol. 19, (2010).

Waligora, J., Bulteel, D., Degrugilliers, P. and Damidot, D., "Chemical and mineralogical characterizations of LD converter steel slags: A multi-analytical technique approach", Materials Characterization, Vol. 61, pp. 39 – 48, (2010).

Kavussi, A. and Modarres, A., "Laboratory fatigue models for recycled mixes with bitumen emulsion and cement", Construction and Building Materials, Vol. 24, pp. 1920–7, (2010).

You, Z. and Buttlar, W., "Discrete Element Modeling to Predict the Modulus of Asphalt Concrete Mixtures", Journal of Materials in Civil Engineering, Special Issue: Micromechanical Characterization And Constitutive Modeling of Asphalt Mixes, pp. 140–6, (2004).

Bazin, P. and Saunier, J.B., "Deformability, Fatigue and Healing Properties of Asphalt Mixes”, Second International Conference on The Structural Design of Asphalt Pavements Proceeding, Ann Arbor, Michigan, (1967).

Bagamapadde, U. and Wahhab, S.A., "Optimization of Steel Slag Aggregate for Bituminous Mixes in Saudi Arab", Journal of Materials in Civil Engineering, pp. 5-30, (1998).

[9] Asi, I.M., Qasrawi, H.Y. and Shalabi, F.I., "Use of Steel Slag Aggregate In Asphalt Concrete Mixes", Canadian Journal of Civil Engineering, Vol. 34 (8), pp. 902–11, (2007).

Pasetto, M. and Baldo, N., "Experimental evaluation of high performance base course and road base asphalt concrete with electric arc furnace steel slags", Journal of Hazardous Materials, Vol. 181, pp. 938–48, (2010).

Pasetto, M. and Baldo N., "Mix design and performance analysis of asphalt concretes with electric arc furnace slag", Construction and Building Materials, Vol. 25, pp. 3458–68, (2011).

Arabani, M., and Azarhoosh A.R., "The Effect of Recycled Concrete Aggregate and Steel Slag on the Dynamic Properties of Asphalt Mixtures", Construction and Building Materials, Vol. 35, pp. 1–7, (2012).

Kavussi, A. and Jalili Qazizadeh, M., "Fatigue characterization of asphalt mixes containing electric arc furnace

(EAF) steel slag subjected to long term aging", Construction and Building Materials, Vol. 72, pp. 158–166, (2014).

نشریه شماره 234، "آیین نامه روسازی آسفالتی راه‌های ایران"، معاونت برنامه ریزی و نظارت راهبردی رییس جمهور، ویرایش اول، (1390).

مقدم نیری، محمدرضا.، جلیلی قاضی زاده، مرتضی و محمدزاده مقدم، ابوالفضل؛ "کاربرد سرباره فولاد در پروژه‌های راهسازی، اولین سمینار فرآوری و کاربردهای سرباره قوس الکتریک، پزوهشکده فولاد دانشگاه صنعتی اصفهان، 134-127، (1386).

توسلی، حمید، "طرح و کنترل بتن آسفالتی گرم"، چاپ اول، انتشارات قلم، (1372).

Kavussi, A. and Modarres, A., "A model for resilient modulus determination of recycled mixes with bitumen emulsion and cement from ITS testing results", Construction and Building Materials, Vol. 24, pp. 2252-2259, (2010).

Huang, Y.H., "Pavement Analysis and Design", Prentice Hall, New Jersey, (2004).

Anagnos, J.N. and Kennedy T.W., "Practical Method of Conducting The Indirect Tensile Test", Center of Highway Research, University of Texas at Austin, Research Report 98-10, Austin, Texas, (1972).

Aksoy, A., Samlioglu, K., Tayfur, S., Ozen, H. (2005) "Effect of Various Additives on Moisture Damage Sensitivity of Asphalt Mixtures", Construction and Building Materials 19, pp 11-18.

Li, Q., Jong Lee, H. and Kim, T.W., "A simple fatigue performance model of asphalt mixtures based on fracture energy", Construction and Building Materials, Vol. 27, pp. 605-11, (2012).

Roque, R., Birgisson, B., Sangpetngam, B. and Zhang, Z.W., "Hot mix asphalt fracture mechanics: a fundamental crack growth law for asphalt mixtures", Journal Association of Asphalt Paving Technologists, Vol. 71, pp. 816–27, (2002).

Birgisson, B., Montepara, A., Romeo, E., Roque, R., Roncella, R. and Tebaldi, G., "Determination of fundamental tensile failure limits of mixtures", Journal Association of Asphalt Paving Technologists, Vol. 76, pp.303–44, (2007).

Mamlouk, M., Souliman, M., and Zeiada, W., "Optimum Testing Conditions To Measure HMA Fatigue And Healing Using Flexural Bending Test", TRB annual meeting, (2012).

Xie, J., Chen, J., Shaopeng, W., Lin, J. and Wei, W., "Performance characteristics of asphalt mixture with basic oxygen furnace slag", Construction and Building Materials, Vol. 38, pp. 796–803, (2013).

Khodary, M., "Evaluation of Fatigue Resistance for Modified Asphalt Concrete Mixtures Based on Dissipated Energy Concept", PhD thesis, Technische Universität Darmstad, (2010).

Rowe, G.M. and Bouldin, M.G., "Improved Techniques to Evaluate the Fatigue Resistance of Asphaltic Mixtures", Proceedings of 2nd Euroasphalt and Eurobitume Congress, Barcelona, Spain, (2000).

Tayebali, A., Rowe, A., G.M. and Sousa, J.B., "Fatigue Response of Asphalt Aggregate Mixtures", Journal of Association of Asphalt Paving Technologists, Vol. 61, pp. 333-360, (1994).