Simultaneous Estimation of Location and Strength of a Heat Source in a Functionally Graded Plate by Inverse Analysis

علوم کاربردی و محاسباتی در مکانیک

Article 7, Volume 29, Issue 2 - Serial Number 18, December 2017, Pages 71-88   

Document Type: Original Article

DOI: 10.22067/fum-mech.v29i2.61392

Authors

maryam shamsa; mohammadreza golbaharhaghighi^* ; parviz malekzadeh

persian gulf

Abstract

In this article, an inverse algorithm based on the conjugate gradient method is applied to estimate the unknown location and time-wise varying strength of the point and distributed heat source in functionally graded rectangular plate from the knowledge of temperature measurements taken from the boundaries of plate. It is assumed that no prior information is available on the functional form of time-wise variation of the heat source strength so estimation process starts with an arbitrary initial guess. The conjugate gradient method is employed for optimization process and the finite element method is applied to solve the governing differential equations. Results show that the estimation of location and strength of point heat source can be obtained with any arbitrary initial guesses..

Keywords

Functionally Graded Materials; Heat transfer; Conjugate Gradient Method; Inverse Problems; Heat Source

Supplementary Files

EA-5-Golbahar.pdf

References

1. Silva Neto, A.J. and Ozisik, M.N., "The estimation of space and time dependent sterength of a volumetric heat source in a one-dimentional plate", International Journal of Heat and Mass Transfer, Vol. 37, No. 6, pp. 909-915, (1994).

2. Pasquetti, R. and Petit, D., "Inverse-heat-conduction problems with boundary element: analysis of a corner effect", Engineering Analysis with Boundary Elements, Vol. 13, No. 4, pp. 321–331, (1994).

3. Yang, C.Y., "Solving the two-dimensional inverse heat source problem through the linear least squares error method", International Journal of Heat and Mass Transfer, Vol. 41, No. 2, pp. 393–398, (1998).

4. Karami, G. and Hematiyan, M.R., "A boundary element method of inverse non-linear heat conduction analysis with point and line heat sources", Communication in Numerical Methods in Engineering, Vol. 16, No. 3, pp.191–203, (2000).

5. Su, J. and Silva Neto, A.J., "Two-dimensional inverse heat conduction problem of source strength estimation in cylindrical rods", Applied Mathematical Modelling, Vol. 25, No. 10, pp. 861-782, (2001).

6. Nortershauser, D. and Millan, P., "Estimation of moving heat sources with a three dimensional unsteady inverse method", Aerospace Science and Technology, Vol. 5, No. 8, pp. 529-540, (2001).

7. Niliot, C.L. and Lefever, F., "A method for multiple steady line heat sources identification on a diffusive system: application to an experimental 2D problem", International Journal of Heat and Mass Transfer, Vol. 44, No. 7, pp. 1425-1438, (2001).

8. Lefever, F. and Niliot, C.L., "The BEM for point heat source estimation: application to multiple static sources and moving sources", International Journal of Thermal Sciences, Vol. 41, No. 6, pp. 536-545, (2002).

9. Lefever, F. and Niliot, C.L., "Multiple transient point heat sources identification in heat diffusion: Application to experimental 2D problems", International Journal of Heat and Mass Transfer, Vol. 45, No. 9, pp. 1951-1964, (2002).

10. Niliot, C.L. and Lefever, F., "A parameter estimation approach to solve the inverse problem of point heat sources identifications", International Journal of Heat and Mass Transfer, Vol. 47, No. 4, pp. 827-841, (2004).

11. Zueco, J., Alhama, F. and C. Gonza'lez Ferna'ndez, F., "Inverse determination of heat generation sources in two-dimensional homogeneous solids: Application to orthotropic medium", International Communications in Heat and Mass Transfer, Vol. 33, No. 1, pp. 40-55, (2006).

12. Liu, C.S., "A two-stage LGSM to identify time-dependent heat source through an internal measurement of temperature", International Journal of Heat and Mass Transfer, Vol. 52, No. 7-8, pp. 1635-1642, (2009).

13. Liu, F.B., "A modified genetic algorithm for solving the inverse heat transfer problem of estimating plane heat source", International Journal of Heat and Mass Transfer, Vol. 51, No. 15-16, pp. 3745-3752, (2008).

14. Yan, L., Fu, C.L. and Yang, F.L., "The method of fundamental solutions for the inverse heat source problem", Engineering Analysis with Boundary Elements, Vol. 32, No. 3, pp. 216-222, (2008).

15. Nili Ahmadabadi, M., Arab, M. and Maalek Ghaini, F.M., "The method of fundamental solutions for the inverse space-dependent heat source problem", Engineering Analysis with Boundary Elements, Vol. 33, No. 10, pp. 1231-1235, ( 2009).

16. Mierzwiczak, M. and Kolodziej, J.A., "Application of the method of fundamental solutions and radial basis functions for inverse transient heat source problem", Computer Physics Communications, Vol. 181, No. 12, pp. 2035-2043, (2010).

17. Geng, F. and Lin, Y., "Aplication of the variational iteration method to inverse heat source problems", Computers and Mathematics with Applications, Vol. 58, No. 11-12, pp. 2098-2102, (2009).

18. Golbahar Haghighi , M.R., Eghtesad, M., Malekzadeh, P. and Necsulescu, D.S., "Three-dimensional inverse transient heat transfer analysis of thick functionally graded plates", Energy Conversion and Management, Vol. 50, No. 3, pp. 450-457, (2009).

19. Mohammadiun, M. and Rahimi, A.B., "Estimation of time-dependent heat flux using temperature distribution at a point in a two layer system", Scientia Iranica, Vol. 18, No. 4, pp. 966-973, (2011).

20. Lee, H.L., J. Chang, W., Chen, W.L. and Yang, Y.C., "Inverse heat transfer analysis of a functionally graded fin to estimate time-dependent base heat flux and temperature distributions", Energy Conversion and Management, Vol. 57, pp. 1-7, (2012).

21. Lee, H.L., Chang, W.J., Sun, S.H. and Yang, Y.C., "Estimation of temperature distributions and thermal stresses in a functionally graded hollow cylinder simultaneously subjected to inner-and-outer boundary heat fluxes", Composites Part B: Engineering, Vol. 43, No. 2, pp. 786-792, (2012).

22. Abou Khachfe, R. and Jarny, Y., "Estimation of heat sources within two dimensional shaped bodies", 3rd Int. Conference on Inverse Problems in Engineering, June 13-18, Port Ludlow, Washington, USA, (1999).

23. Alifanov, O.M., "Inverse heat transfer problems", Springer-Velag, New York, (2000).

24. Daniel, J.W., "The approximate minimization of functional", Pretice-Hall Inc., Englewood Cliffs, (1971).

25. Fletcher, R. and Reeves, C.M., "Function minimization by conjugate gradients", Computer Journal, Vol. 7, No. 2, pp. 149-154, (1964).

26. Golbahar Haghighi, M.R., Eghtesad, M., Necsulescu, D.S. and Malekzadeh, P., "Temperature control of functionally graded plates using a feedforward–feedback controller based on the inverse solution and proportional-derivative controller", Energy Conversion and Management, Vol. 51, No. 1, pp. 140-146,(2010)

27. Daniel, J.W., "The approximate Minimization of Functional", Pretice-Hall Inc., Englewood Cliffs, (1971).

28. Fletcher, R. and Reeves C.M., "Function Minimization by Conjugate Gradient", Computer J., 7, pp. 149-154, (1964).

29. Ozisik, M.N., "Inverse heat transfer: fundamental and applications", CRC Press, New York, (2000).

30. Reddy, J.N., "An introduction to the finite element method", Third Edition, McGraw Hill, (2006).