Fabrication of Polysulfone/Chitosan/Polyvinyl Alcohol Composite by Electrospinning Method and Investigation of Its Morphology

مهندسی متالورژی و مواد

Article 7, Volume 32, Issue 1 - Serial Number 23, June 2021, Pages 85-92   

Document Type: Original Articles

DOI: 10.22067/ma.v32i1.81364

Authors

Sanaz Rezaei Soulegani^* ; Maryam Rasouli^* ; Zahra Sherafat^*

Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran.

Abstract

In the present study, a polysulfone-chitosan-polyvinyl alcohol membrane was prepared through electrospinning. For this purpose, each of the polysulfone, polyvinyl alcohol and chitosan powders were dissolved in a suitable solvent. The polyvinyl alcohol and chitosan solutions were then mixed in different proportions. Subsequently, two separate syringes were used to simultaneously electrospin polysulfone and polyvinyl alcohol/chitosan solutions two . The morphology of the prepared membrane was evaluated using SEM micrographs. From the SEM images, it was clear that  the chitosan-polyvinyl alcohol solution can only be electrospun at low chitosan content. Higher chitosan concentrations do not lead to proper fiber formation. The optimum sample with uniform fibers and adaptable chitosan content was obtained when the chitosan to polyvinyl alcohol ratio was fixed at 30:70. It was found that the feed rate has a significant impact on the morphology of the membrane. Moreover, it was concluded that for a uniform and beadless morphology of polysulfone fibers, a minimum concentration of the initial solution is required. According to the fibers morphology, the threshold concentration of polysulfone was 20 wt%.,
 

Keywords

Electrospinning; Polysulfone; Chitosan; Polyvinyl alcohol; Membrane

Supplementary Files

7-sherafat.pdf

References

1.   Suja, P. S., Reshmi, C. R., Sagitha, P. and Sujith, A., "Electrospun nanofibrous membranes for   water purification", Polymer Reviews, Vol. 57(3), pp. 467-504, (2017).

2.    Huang, Z. M., Zhang, Y. Z., Kotaki, M. and Ramakrishna, S., "A review on polymer nanofibers by electrospinning and their applications in nanocomposites", Composites science and technology, Vol. 63(15), pp. 2223-2253, (2003).

3.    Zhu, N., and Chen, X., "Biofabrication of tissue scaffolds", In Advances in biomaterials science and biomedical applications, InTech, Chapter 12, pp. 315-328, (2013).

4.    Liu, L., and Pan, Z., "Properties of Hydrophilic Chitosan/Polysulfone Nanofibrous Filtration Membrane", Journal of Engineered Fabrics & Fibers (JEFF), Vol. 9(1), pp. 76-86, (2014).

5.    Kim, K. S, Lee, K. H., Cho, K. and Park, C. E., "Surface modification of polysulfone ultrafiltration membrane by oxygen plasma treatment", Journal of Membrane Science, Vol. 199(1-2), pp. 135-145, (2002).

6.    Park, W. H., Jeong, L., Yoo, D. I., and Hudson, S., "Effect of chitosan on morphology and conformation of electrospun silk fibroin nanofibers", Polymer, Vol. 45(21), pp. 7151-7157, (2004).

7.    Yan, E., Cao, M., Wang, Y., Hao, X., Pei, S., Gao, J., Wang, Y., Zhang, Z. and Zhang, D., "Gold nanorods contained polyvinyl alcohol/chitosan nanofiber matrix for cell imaging and drug delivery", Materials Science and Engineering C, Vol. 58, pp. 1090-1097, (2016).

8.    Ramakrishna, S., "An introduction to electrospinning and nanofibers", World Scientific, Singapore, (2005).