An Estimator for Torque and Draft Force Requirements of a New Up-cut Rotary Tiller

ماشین های کشاورزی

Article 2, Volume 10, Issue 1 - Serial Number 19, 2020, Pages 11-21   

Document Type: Research Article-en

DOI: 10.22067/jam.v10i1.71744

Authors

I. Ahmadi^{* 1}; M. Beigi²

¹Department of Plant Production and Genetics Engineering, Isfahan (Khorasgan) Branch, Islamic Azad University, Isfahan, Iran

²Department of Mechanical Engineering, Tiran Branch, Islamic Azad University, Tiran, Iran

Abstract

The aim of this study is to design, fabricate and evaluate a new type of up-cut rotary tiller and to develop correct formulas to estimate its torque and draft force using the laws of classical mechanics. In order to verify the model, a real-sized prototype of the rotary tiller was tested. It was hypothesized that four processes are involved to create the rotary tiller torque, namely soil cutting, soil lifting, soil-metal friction, and soil velocity. Furthermore, it was assumed that the horizontal components of soil cutting and soil-metal friction forces create the required draft of the machine. Based on these hypothesizes, mathematical formulas were developed to calculate torque, and draft requirements of the machine. To facilitate performing necessary calculations, the developed formulas were entered in a worksheet of the MS Excel software. According to the results of this study, the average experimental draft and torque of the machine tilling a silty clay loam soil were 16.8 N and 12.8 Nm, respectively. Furthermore, the average theoretical draft and torque of the machine were 13 N and 11.8 Nm respectively. These promising results can be considered as the accuracy check of the formulas developed herein.

Keywords

theoretical modeling; torque and draft force measurement; up-cut rotary tiller

References

1. Ahmadi, I. 2017. A torque calculator for rotary tiller using the laws of classical mechanics. Soil & Tillage Research 165: 137-143.

2. Asl, J.H., and S. Singh. 2009. Optimization and evaluation of rotary tiller blades: computer solution of mathematical relations. Soil & Tillage Research106: 1-7.

3. Bernacki, H., J. Haman, and Cz. Kanafojski. 1972. Agricultural machines, theory and construction. Scientific publications foreign co-operation center of the CISTEI. Warsaw.

4. Chertkiattipol, S., and T. Niyamapa. 2010. Variations of torque and specific tilling energy for different rotary blades. International Agricultural Engineering Journal 19 (3): 1-14.

5. Gholami, H., D. Kalantari, and M. Rajabi Vandechali. 2017. Testing and evaluation of a rototiller with new ridged blades. Journal of Agricultural Machinery 7 (1): 26-36. (In Farsi).

6. Matin, M.A., J. M. Fielke, and J. M. A. Desbiolles. 2015. Torque and energy characteristics for strip-tillage cultivation when cutting furrows using three designs of rotary blade. Biosystems Engineering 129: 329-340.

7. Shibusawa, S. 1993. Reverse rotational rotary tiller for reduced power requirement in deep tillage. Journal of Terramechanics 30 (3): 205-217.