The Effect of Rotational Speed, Temperature, Type of Screw and Die Diameter on the Amount of Oil Extracted from Sesame

ماشین های کشاورزی

Article 17, Volume 10, Issue 2 - Serial Number 20, 2020, Pages 325-336   

Document Type: Research Article

DOI: 10.22067/jam.v10i2.78223

Authors

M. Asafi¹; R. Meamar Dastjerdi^{* 1}; M. Noshad²

¹Department of Agricultural Machinery and Mechanization Engineering, Agricultural Sciences and Natural Resources University of Khuzestan

²Department of Food Sciences, Agricultural Sciences and Natural Resources University of Khuzestan, Iran

Abstract

Introduction
In recent years, with increasing population growth and improving livelihoods, the consumption of vegetable oils has been increasing and has led to an increase in the level of oilseed cultivation. Sesame (Sesamum indicum L.) is an economically important crop which is widely cultivated all over the world. Sesame has been considered as an oil plant for cultivation in Iran's climatic conditions recently. Sesame contains about 58-44% oil, 18-25% protein and 13.5% carbohydrate. Sesame is grown mainly in the developing tropical and subtropical areas of Asia, Africa. The three countries of China, India and Myanmar are accounted as the largest producers of this product in the world. Screw pressing is the most reliable method for extracting oil from oilseed grains. This method is simpler than others and is more efficient in terms of cost and food security. The general objective of this research was to investigate the effects of rotational speed, temperature, type of screwing and die diameter on the amount of oil extraction from sesame oil and prediction of oil extraction using artificial neural network and compare to regression models.
Materials and Methods
In this research, a sesame oil extractor machine was designed and manufactured. Various experiments were carried out to determine the amount of oil extracted based on variable parameters such as the shape of the press screw, the rotational speed, the temperature and the diameter of the die. The experiment was performed at three levels of press screw type (constant pitch, variable pitch and conical), temperature (30, 60, 90), three levels of rotational speed (20, 50, 80 rpm) and three level of die diameter (6, 8, 10mm). The experimental design was factorial based on completely randomized design with three replications. The mathematical software (Matlab, 2012b) was used to determine the optimal neural network. The type of network was Multi-Layer Perceptron (MLP). In order to design this network, there were 3 neurons in the first layer (input), which was equal to the number of studied variable parameters (type of screw, rotational speed and temperature), the second layer was hidden layer, and the last layer (the output) had a neuron for the extracted oil) was equal to the number of outputs examined in this network. The Levenberg-Marquardt algorithm (LM) was used to train it, which is one of the fastest neural network training methods. The Second-order polynomial regressions were performed based on the step-by-step method and non-meaningful sentences were eliminated from the model. The accuracy of the models was determined by calculating the correlation coefficient and root mean square error (RMSE) indices.
Results and Discussion
The results of the experiments showed that the effect of type of press screw, rotational speed, extraction temperature and die diameter on the amount of oil extraction was significant (p≤0.01). The highest amount of extracted oil was obtained at conical press screw , rotational speed of 50 rpm, temperature of 60 °C and die diamter of 6 mm. An artificial neural network of three-layer perceptron and regression models were used to predict the amount of sesame oil extracted. The results showed that the artificial neural network model (1-8-3) with a correlation coefficient of 97.47% and a RMSE of 0.65 compared to linear regression and quadratic regression models had the higher efficiency in predicting the amount of extracted oil.
Conclusion
In this study, the effect of temperature, rotational speed, press screw type and die diameter on the amount of extracted oil were investigated. The results of this study showed that the change in the type of screw, rotational speed, diameter of die and temperature on the amount of extracted oil was significant at 1% level. Results also showed that the artificial neural network method was more efficient than linear and second order regression methods.

Keywords

Artificial neural networks; Die dimension; Extraction; Press screw; Rotational speed; Sesame oil; temperature

References

1. Adeeko, K., and O. Ajibola. 1990. Processing factors affecting yield and quality of mechanically expressed groundnut oil. Journal of Agricultural Engineering Research 45: 31-43.

2. Ajibola, O., D. Okunade, and O. Owolarafe. 2002. Oil point pressure of soybean. Journal of Food Process Engineering 25: 407-416.

3. Alyemeni, M. N., A. Basahy, and H. Sher. 2011. Physico-chemical analysis and mineral composition of some sesame seeds (Sesamum indicum L.) grown in the Gizan area of Saudi Arabia. Journal of Medicinal Plants Research 5: 270-274.

4. Bamgboye, A. I., and A. D. Adejumo. 2007. Development of a sunflower oil expeller. Agricultural Engineering International: CIGR EJournal. IX: 1-7

5. Bargale, P., R. Ford, F. Sosulski, D. Wulfsohn, and J. Irudayaraj. 1999. Mechanical oil expression from extruded soybean samples. Journal of the American Oil Chemists' Society 76: 223-229.

6. Baryeh, E. A. 2001. Effects of palm oil processing parameters on yield. Journal of Food Engineering 48: 1-6.

7. Biabani, A., and H. Pakniyat. 2008. Evaluation of seed yield-related characters in sesame (Sesamum indicum L.) using factor and path analysis. Pakistan Journal of Biological Sciences 11: 1157-1160.

8. Cert, A., W. Moreda, and M. Perez-Camino. 2000. Chromatographic analysis of minor constituents in vegetable oils. Journal of Chromatography A 881: 131-148.

9. Deli, S., M. Farah Masturah, Y. Tajul Aris, and W. Wan Nadiah. 2011. The Effects of physical parameters of the screw press oil expeller on oil yield from Nigella sativa L seeds. International Food Research Journal 18.

10. Dolatabadi, Z., A. H. E. Rad, V. Farzaneh, S. H. A. Feizabad, S. H. Estiri, and H. Bakhshabadi. 2016. Modeling of the lycopene extraction from tomato pulps. Food Chemistry 190: 968-973.

11. Eggers, R., H. Boeck, and W. Stein. 1985. Messung von Druck‐und Temperaturprofilen beim Abpressen von Ölsaaten in Seiherschneckenpressen. Fette, Seifen, Anstrichmittel 87: 494-499.

12. El Khier, M. K. S., K. E. A. Ishag, and A. Yagoub. 2008. Chemical composition and oil characteristics of sesame seed cultivars grown in Sudan. Research Journal of Agriculture and Biological Sciences 4: 761-766.

13. Erenturk, S., and K. Erenturk. 2007. Comparison of genetic algorithm and neural network approaches for the drying process of carrot. Journal of Food Engineering 78: 905-912.

14. Evangelista, R. L. 2009. Oil extraction from lesquerella seeds by dry extrusion and expelling. industrial crops and products 29: 189-196.

15. FAOSTAT. 2017. URL http://www.fao.org/faostat/en/#data/QC.

16. Feyzollahzadeh, M., A. M. Nikbakht, and A. ModarresMotlagh 2013. Investigation of the Effects of Irrigation and Nutrient Treatments on Biophysical and Biomechanical Properties of Safflower Seed. Journal of Agricultural Machinery 3 (1): 58-70. (In Farsi).

17. Hamzat, K., and B. Clarke. 1993. Prediction of oil yield from groundnuts using the concept of quasi-equilibrium oil yield. Journal of Agricultural Engineering Research 55: 79-87.

18. Haumann, B. 1997. Mechanical extraction: capitalizing on solvent-free processing. inform 8: 165-174.

19. Hernandez-Perez, J., M. Garcıa-Alvarado, G. Trystram, and B. Heyd. 2004. Neural networks for the heat and mass transfer prediction during drying of cassava and mango. Innovative Food Science & Emerging Technologies 5: 57-64.

20. Khan, L., and M. Hanna. 1983. Expression of oil from oilseeds-a review. Journal of Agricultural Engineering Research 28: 495-503.

21. Malek, F. 2000. Edible Fats and Vegetables Oils, Characteristic and Processing Farhang-Ghalam Press. 464 p. (In Farsi).

22. Mazaheri, A. 2006. New technology in oils and fats science. Journal of Vegetable Oil Industry 37: 12-14.

23. Ogunsina, B., O. Owolarafe, and G. Olatunde. 2008. Oil point pressure of cashew (Anacardium occidentale) kernels. International Agrophysics 22: 53.

24. Olaomi, J. 2008. Design and Construction of a Motorized Groundnut oil Expelling Machine. B. Eng Thesis, Department of Mechanical Engineering, University of Ilorin, Nigeria.

25. Mohsenin, N. N. 1986. Physical properties of plant and animal materials. Gordon and Breach science publishers. 734 p.

26. Rababa’h, T. 1998. Improvement of the quality of Halawa Tahinia with special emphasis on the problem of oil separation. Master thesis, Jordan University.

27. Rostami, M., V. Farzaneh, A. Boujmehrani, M. Mohammadi, and H. Bakhshabadi. 2014. Optimizing the extraction process of sesame seed's oil using response surface method on the industrial scale. Industrial Crops and Products 58: 160-165.

28. Siger, A., and M. Nogala-Kalucka and E. Lampart-Szczapa. 2008. The content and antioxidant activity of phenolic compounds in cold‐pressed plant oils. Journal of Food Lipids 15: 137-149.

29. Soetaredjo, F. E., G. Budijanto, R. Prasetyo, and N. Indraswati. 2008. Effects of pre-treatment condition on the yield and quality of neem oil obtained by mechanical pressing. ARPN Journal of Engineering and Applied Sciences 3: 45-49.

30. Wiesenborn, D., R. Doddapaneni, K. Tostenson, and N. Kangas. 2001. Cooking indices to predict screw‐press performance for crambe seed. Journal of the American Oil Chemists' Society 78: 467-471.