Physical, mechanical and chemical properties of strawberry variety of Parus at different classes

مجله پژوهشهای علوم و صنایع غذایی ایران

Article 2, Volume 16, Issue 1 - Serial Number 61, March and April 2020, Pages 17-27   

Document Type: Research Article

DOI: 10.22067/ifstrj.v16i2.79568

Authors

Farhad Fatehi¹; Asghar Mahmoudi^{* 1}; Adel Hosseinpour²; Hadi Samimi Akhijahani³

¹Department of Biosystem Engineering, University of Tabriz, Tabriz, Iran.

²Department of Biosystem Engineering, University of Urmia, Urmia, Iran.

³Department of Biosystem Engineering, Faculty of Agriculture, University of Kurdistan, Sanandaj, Iran.

Abstract

Introduction: Strawberry is one of the native and small fruits of moderate regions, which its cultivation  has been increased in all over the world including Iran. Due to the abundance of vitamin C and mineral materials, it is very useful for some diseaseses. Lack of the knowledge in production management, harvesting, cooling, transportion, storage, marketing and processing equipments and connection between these different parts are the main problems throgh industrial production of strawberry fruit (Salami et al., 2010). According to the various studies, the parameters such as color, shape, size and mass are not sufficient for the consumer to purchase the fruit (Abbot, 1991). They would like to have more information about the fruit which is supposed to be purchased (Voca et al., 2008). Several researchers have been investigated physical and chemical properties of different varieties of strawberry fruit (Wojdylo et al., 2009; Salamat, 2011; Nemzer et al., 2018). According to the litrature, any international standard classification for Parus strawberry (which is mostly cultivated in Iran) based on physical and chemical was not found. In this study, some physical, mechanical and chemical properties of strawberry fruit Parus variety, as well as the relationship between them, were investigated. The classification was performed based on the appearance features including color and size with the opinion of the expert in six classes.
 
Materials and methods: In Kurdistan province strawberry fruit is often grown in open area and cultivated areas of Parus variety due to many reasons are increasing. To classify the strawberries, six classes were considered. Physical and mechanical properties such as dimensions, density, porosity, stiffness and biological yield point were measured at least at five replications. The porosity of the strawberries was also calculated through the division of the difference between actual and apparent density to actual density. Also, the stiffness and biological yield point were measured using Universal Instron Testing Machine (Zwick/Roll). Chemical properties of Parus strawberry including vitamin C, acidity, total soluble solids and flavor index were investigated at five replications.
 
Results and discussions: The analysis of variance showed that all chemical properties including ascorbic acid, acidity, total soluble solids, and flavor index, were strongly influenced by the class. The LSD mean comparison showed that the highest levels of vitamin C were related to the ripe fruits which had a direct relationship with fruit size. The acidity values between the classes varied from 0.55 to 1.08, and the lowest value was related to the first, second and third classes, respectively. The total soluble solid material (TSS) was affected by some factors: sugar (as main part), organic acid and organic pectins and was increased by growing strawberries and increasing the amount of sugar. For the first, second and third  classes, TSS was higher than those of the fourth, fifth and sixth clases. The flavor index value for the lower classes (first, second and third) is higher than the higher classes (almost 2 times). The analysis of variance for all physical and mechanical properties indicated that all parameters are affected by the classes. Due to its more soluble materials, the maximum value for actual density was related to the third and second classes, respectively. The apparent density of agricultural products depends on various factors such as geometric shape, size, surface properties, moisture content and measurement method. The apparent density for the first and fourth classes were 561.743 and 498.408 gr.mm-3, respectively. The maximum and minimum value of stiffness was related to first (about 5.2 N.mm-2) and fourth (about 28.2 N.mm-2), respectively. For biological yield the maximumvalue was related to the fourth class, as well.
 
Conclusion: In this study, the classification of strawberry, variety of Parus was investigated based on physical, mechanical and chemical properties. All properties were affected by changing the classes. The results of this research can be used to design and construct post-harvest and sorting mechanisms of agricultural products which require comprehensive information about physical, mechanical, chemical properties.

Keywords

Biological yield point; Stiffness; Flavor index; Strawberry

References

Abbott, J. A. 1999. Quality measurement of fruits and vegetables. Journal of postharvest Biology and Technology, 15: 207-225.

Abolghasemi. R., B. Emadi, M. H. Aghkhani, and S. Beyraghi Toosi. 2010. Determination of the parameters of peach molding using ultrasonic waves. Journal of Iranian Food Industry Researches, 5 (1): 63-74. (In Farsi).

Darrow, G. M., M. S. Wilcox, W. D. Scott, and M. C. Hutchins. 1947. Breeding Strawberries for Vitamin C. Journal of Heredity, 38: 363-365.

Deshpande, S. D., S. Bal. and T. P. Ojha. 1991. Physical properties of soybean. Journal of Agricultural Engineering Research, 56: 89-98.

Doving, A., and F. Mago. 2002. Methods of testing strawberry fruit firmness. Journal of Acta Agriculture Scandinavica, 52: 43-51.

Fatahi Moghadam, J., S. E. Seyed Ghasemi, and S. Maadani. 2016. Effect of five basic on the physical, mechanical and chemical properties of yashar variety tangerine fruit during ripening process. Plant production researches magazine, 24(2): 109-123.

FAO. 2013. FAOSTAT Agricultural Statistics Database. Retrieved from http://www.fao.org.

Ghanbarzadeh, B. 2007. Physical features of food of food processing systems. Ayyzh. Tehran. (In Farsi)

Gorji Chaksepari, A., A. Rajabipor, H. Mobli. 2010. Strength behaviour study of apples under compression loading. Modern Applied Science, 4(7): 173-181.

Kader, A.A. 1991. Quality and Its Maintenance in Relation to the Postharvest Physiology of Strawberry, p. 145-152, In: A. Dale and J.G Luby (editors).

Li, L., B. Li, H. Li Shang, D. Nan Li, X. Jun Meng, G. Hui Huang. 2014. Physical and Chemical Properties of Four Strawberry Cultivars. Advanced Materials Research, 1010-1012: 1215-1219.

Mitcham, B. 1996. Quality assurance for Strawberries: A Case Study. Perishables Handling Newsletter Issue No. 85. Pages 6-9.

Mohsenin, N.N. 1986. Properties of Plant and Animal Material. Gordon and Breach. New York.

Mostofi, M. and F. Najafi. 2006. Laboratory analytical methods in Horticultural Science. Tehran University. Tehran. (In Farsi)

Nemzer, B., L. Vargas, X. Xia, and H. Feng. 2018. Phytochemical and physical properties of blueberries, tart cherries, strawberries, and cranberries as affected by different drying methods. Food Chemistry, 262: 242-250.

Ozcan, M.M. and H. Haciseferogullari. 2007. The strawberry (Arbutus unedo l.) fruit. Chemical composition physical properties and mineral contents. Journal of Food Engineering, 78: 1022-1028.

Pelayo-Zaldivar, C., S. E. Ebeler, and A. Kader. 2005. Cultiver and harvest date effect on flavor and other quality attributes of California strawberries. Journal of Food Quality, 28: 78-97.

Razavi, M.A. and R. Akbari. 2012. Bio-physical properties of agricultural products and foodstuffs. Ferdowsi University of Mashhad. Mashhad. (In Farsi)

Rodriguez-Ramirez, J., L. Mendez-Lagunas, A. Lopez-Ortiz, and S. Sandoval Torres. 2012. True Density and Apparent Density during the Drying Process for Vegetables and Fruits: A Review. Journal of Food Science, 77(12): 145–154.

Salamat. R. 2011. Study the changes in strawberry Stiffness and determine the appropriate date of harvest. Faculty of Agriculture. Tabriz University, Tabriz. (In Farsi)

Salami, P., H. Ahmadi, A. Keyhani, and M. Sarsaifee. 2010. Strawberry post-harvest energy losses in Iran. Researcher, 2: 67-73.

Samec, D., M. Maretic, I. Lugaric, A. Mesic, B. Duralija. 2016. Assessment of the differences in the physical, chemical and phytochemical properties of four strawberry cultivars using principal component analysis. Food Chemistry, 194 (1): 828-834.

Samimi Akhijahani, H. and J. Khodaei. 2011. Some physical properties of strawberry (Kurdistan varity). World Applied Sciences Journal, 13 (2): 256-212.

Samimi-Akhijahani, H., Arabhosseini, A., Kianmehr, M.H. 2017. Comparative quality assessment of different drying procedures for plum fruits (Prunus domestica L.), Czech J. Food. Eng. 35: 449–455.

Strum, K., D. Koron, and F. Stampar. 2003. The composition of fruit of different strawberry varieties depending maturity stage. Food chemistry, 83: 417-422.

Tabatabaikoloor, R. 2014. Bio-mechanical behavior of kiwifruit by fruit orientation and storage conditions. International Conference Agricultural Engineering, Zurich, 6-10 July.

Taghavi, T. 2005. Strawberry Production Guide. Sana. Tehran. (In Farsi)

Voca, S., N. Dobricevic, V. Dragovic-Uzelac, J. DuralijaDruzic, Z. Cmelik, and M .S. Babjelic. 2008. Fruit quality of new early ripening strawberry cultivars in Crotia Journal of Food Technology and Biotechnology, 46: 292-298.

Wang, S.Y., G. J. Galletta, and J.L. Mass. 1997. Chemical characterization of 24 strawberry cultivars and selection Journal of Small Fruit & Viticulture, 5: 21-36

Wojdylo, A., A. Figiel, J. Oszmianski. 2009. Effect of drying methods with the application of vacuum microwaves on the bioactive compounds, color, and antioxidant activity of strawberry fruits. Journal of agricultural and food chemistry, 57: 1337–1343.