Effect of Glycine Betaine Nanocomposite Coated with Chitosan and Moderate Salinity Stress on In vitro Microtuberization of Potato (Solanum tuberosum L.) cv. Agria

علوم باغبانی

Article 11, Volume 37, Issue 2 - Serial Number 58, August 2023, Pages 437-451   

Document Type: Research Article

DOI: 10.22067/jhs.2022.76343.1165

Authors

S. Mahmodi Soreh¹; A. Motallebi Azar^{* 1}; J. Panahandeh¹; Gh. Gohari²; A. Jahanian¹

¹Department of Horticulture, Faculty of Agriculture, University of Tabriz, Tabriz, Iran

²Department of Horticulture, Faculty of Agriculture, University of Maragheh, Maragheh, Iran

Abstract

Introduction
Potato (Solanum tuberosum L.) is an important food and cash crop having the first rank in the world from non grain crops to ensure food security. The tubers produced through the conventional propagation are characterized by low multiplication rate and susceptibility to pathogens. Microtubers are an ideal propagating material for producing high quality seed potatoes. Nowadays, the production, application, and biological risk assessment of nano-scaled products have attracted global concerns in various fields such as agricultural, biotechnological, medicinal, and plant sciences. Chitosan, a biocompatible polymer, has been widely utilized to improve the production of nano-chemicals, thereby improving crop growth, productivity, and immunity. Nanotechnology plays an important role in modern agriculture to address global challenges such as climate change, severity of plant diseases and the limited availability of important plant nutrients. Polymer-based nano-formulations have recently received the greatest attention with the key objectives of developing less harmful, plant growth promoting and protective agents of biodegradable and natural origin. Use of chitosan-based nanoparticles in agriculture field is still in a budding phase. Significant outcomes have been reported in in vitro and a few in vivo studies in plant growth and protection by chitosan-based nanomaterials.
 
Materials and Methods
MS medium containing 80 g of sucrose, containing glycine betaine at concentrations of 20 and 40 mg/l, chitosan at a concentration of 240 mg/l, glycine betaine 20 and chitosan 240 mg/l, glycine betaine 40 and chitosan 240 mg/l, 120 mg/l, glycine betaine nanocomposite coated with chitosan 120 and 240 mg/l and control treatment, as well as nonsalinity treatments with the same compounds and concentrations mentioned for salinity were cultured. The study was performed in randomized complete block design with three replications and sixteen treatment. Glycine betaine nanocomposite coated with chitosan were prepared at Maragheh University as follows. Chitosan, glycine betaine, and triphosphate are major consumables. First, chitosan was dissolved well with acetic acid under the influence of temperature. Then, a certain amount of glycine betaine was dissolved in distilled water and added to the chitosan. Tri-polyphosphate (TPP) was dissolved in distilled water at a certain volume ratio and added dropwise to the mixture of chitosan and glycine betaine. The precipitate obtained under the freeze-drying process lead to the preparation of its powder.
 
 
Results and Discussion
According to the comparison of the means, treatment of glycine betaine coated with chitosan nanocomposite at a concentration of 120 mg/l produced the highest number of microtuber during the experiment from the first month to the final month. The nanocomposite was more capable of improving growth and biomass than the bare ZnONPs in pepper. The application of the nanocomposite increased the concentration of chlorophylls (51%), carotenoids (70%), proline (2-fold), and proteins (about 2- fold). The supplementation of culture medium with the nanomaterials upregulated enzymatic antioxidant biomarkers (catalase and peroxidase) (Asgari-targhi et al., 2021). The highest mean microtuber weight was related to the nanocomposite treatment of 120 mg/l with a weight of 29 mg. In the microtuber diameter, this treatment had the highest value. The results of analysis of variance in Table 1 indicate that the effect of moderate salinity and the interaction of moderate salinity and nanocomposite treatments are not significant and the effect of experimental treatments is significant at the level of 5% probability. Due to the fact that the most important trait in the potato microtuberization is microtuber yield, so in the experiment, the highest microtuber yield was earned nanocomposite treatment with 131 mg and the lowest in control treatment with 87 mg. It seems that by using stress-reducing compounds such as glycine betaine and chitosan and nanocomposites, these compounds increase the amount of genes responsible for the formation of microtuber, and as a result, increasing the proteins involved in stresses induce more microtuberization. Also, nanocomposite materials, more assimilated materials may be transferred from the roots to microtuberization processes.
 
Conclusion
 The microtuber produced in the glycine betaine coated with chitosan nanocomposite treatment produced the highest number of microtubers in the first, second, third, and final months. In treatments with moderate salinity in the first, second, third and final months, the number of microtuber and eyes and sprouted microtubers had the highest amount compared to the treatment without moderate salinity. Also, plants treated with glycine betaine voated with chitosan nanocomposite in the microtuber trate showed a greater effect than chitosan and glycine betaine with chitosan. According to the findings of this study, it seems that the use of nanocomposite materials in increasing the microtuber and reducing the vegetative growth of potato shoots has been made in Agria cultivar.
 

Keywords

Chitosan; Glycine betaine; Microtuberization; Nanocomposite

References

1. Abedini, M., Motallebi Azar, A., Zaare Nahandi, F., & Gohari, G. (2020). Application of pectin-tagged nano silver and triacontanol on in vitro microruberization of Solanum tuberosum cv. Agria. Journal of Vegetables Sciences, 4(1), 57–70.
2. Akbari, A., Jafari, H., Gohari, G., Kheiri, G., & Mahdavinia, G. R. (2021). Fulvic acid-embedded poly (vinyl alcohol)–zinc oxide hydrogel nanocomposite: synthesis, characterization, swelling and release kinetic. International Nano Letters, 11(4), 347–354.
3. Al-Jibouri, A.M.J., Abed, A.S., Hussin, Z.S., & Abdulhusein, A.A. (2017). Effect of nanoparticles on in vitro microtuberization of potato cultivars (Solanum tuberosum). Journal of Biotechnology Research Center, 11(1), 57–61.
4. Asgari-targhi, G., Iranbakhsh, A., Oraghi, Z., & Hatami, A. (2021). Synthesis and characterization of chitosan encapsulated zinc oxide (ZnO) nanocomposite and its biological assessment in pepper (Capsicum annuum) as an elicitor for in vitro tissue culture applications. International Journal of Biological Macromolecules, 189, 170–182. https://doi.org/10.1016/j.ijbiomac.2021.08.117
5. Ashraf, M., & Foolad, M.R. (2007). Roles of glycine betaine and proline in improving plant abiotic stress resistance. Environmental and Experimental Botany, 59(2), 206–216.
6. Bandara, P.M.S., & Tanino, K.K. (1995). Paclobutrazol enhances minituber production in Norland potatoes. Journal of Plant Growth Regulation, 14(3), 151–155.
7. Borna, R.S., Hoque, M., & Sarker, R. (2019). In vitro microtuber induction and regeneration of plantlets from microtuber discs of cultivated potato (Solanum tuberosum). Plant Tissue Culture and Biotechnology, 29(1), 63–72. https://doi.org/10.3329/ptcb.v29i1.41979
8. Castiglioni, P., Bell, E., Lund, A., Rosenberg, A.F., Galligan, M., Hinchey, B.S., Bauer, S., Nelson, D.E., & Bensen, R.J. (2018). Identification of GB1, a gene whose constitutive overexpression increases glycinebetaine content in maize and soybean. Plant Direct, 2(2), e00040.
9. Chibu, H. (2000). Effects of chitosan applications on the growth of several crops. 5(3), 182.
10. Dashti, F., Parvizi, K., Ashraf, H., Chaeichi, M.R., & Esna Ashari, M. (2013). Effects of different concentrations of paclobutrazul and plantlet density on minituber production in potato cv. Sante. Iranian Journal of Horticultural Science, 44(1), 11-20.‏
11. Demiral, T., & Türkan, I. (2004). Does exogenous glycinebetaine affect antioxidative system of rice seedlings under NaCl treatment? Journal of Plant Physiology, 161(10), 1089–1100.
12. Donnelly, D.J., Coleman, W.K., & Coleman, S.E. (2003). Potato microtuber production and performance: a review. American Journal of Potato Research, 80(2), 103–115.
13. Fatima, B., Usman, M.U.H.A.M.M.A.D., Ahmad, I.M.T.I.A.Z., & Khan, I.A. (2005). Effect of explant and sucrose on microtuber induction in potato cultivars. International Journal of Agriculture and Biology, 7(1), 63-66.‏
14. Garkeroodi, P.G., Zaare-Nahandi, F., Azar, A.M., Panahandeh, J., & Dadpour, M.R. (2016). Optimization of in vitro microtuberization of potato (Solanum tuberosum cv. Agria) using paclobutrazole and uniconazol. Iranian Journal of Horticultural Science, 47(2).‏
15. Gohari, G., Zareei, E., Kulak, M., Labib, P., Mahmoudi, R., Panahirad, S., Jafari, H., Mahdavinia, G., Juárez-Maldonado, A., & Lorenzo, J.M. (2021). Improving the berry quality and antioxidant potential of flame seedless grapes by foliar application of chitosan–phenylalanine nanocomposites (CS–Phe NCs). Nanomaterials, 11(9), 2287.
16. Guru, A., Dwivedi, P., Kaur, P., & Pandey, D.K. (2021). Exploring the role of elicitors in enhancing medicinal values of plants under in vitro condition. South African Journal of Botany.‏
17. Hamza, E.M. (2019). Improvement of potato micropropagation and microtubers formation as affected by nanoparticles. Middle East Journal of Agriculture Research, 08(02), 525–532.
18. Hidangmayum, A., Dwivedi, P., Katiyar, D., & Hemantaranjan, A. (2019). Application of chitosan on plant responses with special reference to abiotic stress. Physiology and Molecular Biology of Plants, 25(2), 313–326.
19. Jianglian, D., & Shaoying, Z. (2013). Application of chitosan based coating in fruit and vegetable preservation: a review. Journal Food Processing Technology, 4(5), 227.‏
20. Kim, D.H., Gopal, J., & Sivanesan, I. (2017). Nanomaterials in plant tissue culture: The disclosed and undisclosed. RSC Advances, 7(58), 36492–36505. https://doi.org/10.1039/c7ra07025j
21. Kumar, V., Shriram, V., Hoque, T. S., Hasan, M., Burritt, D.J., & Hossain, M. A. (2017). Glycinebetaine-mediated abiotic oxidative-stress tolerance in plants: physiological and biochemical mechanisms. In Stress Signaling in Plants: Genomics and Proteomics Perspective, 2, 111–133.
22. Kwak, S.Y., Lew, T.T.S., Sweeney, C.J., Koman, V.B., Wong, M.H., Bohmert-Tatarev, K., & Strano, M.S. (2019). Chloroplast-selective gene delivery and expression in planta using chitosan-complexed single-walled carbon nanotube carriers. Nature Nanotechnology, 14(5), 447-455.‏
23. Macháčková, I., Konstantinova, T.N., Sergeeva, L.I., Lozhnikova, V.N., Golyanovskaya, S.A., Dudko, N.D., Eder, J., & Aksenova, N.P. (1998). Photoperiodic control of growth, development and phytohormone balance in Solanum tuberosum. Physiologia Plantarum, 102(2), 272–278.
24. Mahmoudi, R., Razavi, F., Rabiei, V., Gohari, G., & Palou, L. (2022). Application of Glycine betaine coated chitosan nanoparticles alleviate chilling injury and maintain quality of plum (Prunus domestica) fruit. International Journal of Biological Macromolecules, 207, 965–977.
25. Malerba, M., & Cerana, R. (2020). Chitin- and chitosan-based derivatives in plant protection against biotic and abiotic stresses and in recovery of contaminated soil and water. Polysaccharides, 1(1), 21–30. https://doi.org/10.3390/polysaccharides1010003
26. Mamiya, K., Tanabe, K., & Onishi, N. (2020). Production of potato (Solanum tuberosum) microtubers using plastic culture bags. Plant Biotechnology, 37(2), 233–238. https://doi.org/10.5511/PLANTBIOTECHNOLOGY.20.0312A
27. Meena, M., Pilania, S., Pal, A., Mandhania, S., Bhushan, B., Kumar, S., Gohari, G., & Saharan, V. (2020). Cu-chitosan nano-net improves keeping quality of tomato by modulating physio-biochemical responses. Scientific Reports, 10(1), 1–11.
28. Mulugeta Diro, M.F. (2014). Microtuber induction of two potato (Solanum tuberosum) varieties. Advances in Crop Science and Technology, 02(02), 2–4. https://doi.org/10.4172/2329-8863.1000122
29. Sadawarti, M.J., Pandey, K.K., Singh, B.P., & Samadiya, R.K. (2016). A review on potato microtuber storability and dormancy. Journal of Applied and Natural Science, 8(4), 2319-2324.‏
30. Saharan, V., & Pal, A. (2016). Current and future prospects of chitosan-based nanomaterials in plant protection and growth. In Chitosan Based Nanomaterials in Plant Growth and Protection (pp. 43–48). Springer.
31. Santo Pereira, A.E., Silva, P.M., Oliveira, J.L., Oliveira, H.C., & Fraceto, L.F. (2017). Chitosan nanoparticles as carrier systems for the plant growth hormone gibberellic acid. Colloids and Surfaces B: Biointerfaces, 150, 141-152.‏
32. Shouqiang, O., & Langlai, X. (2003). Effects of chitosan on nutrient qualities and some agronomic characters of non-heading Chinese cabbage. Plant Physiology Communications, 39(1), 21–24.
33. Willmer, C., & Fricker, M. (1996). Stomata (Vol. 2). Springer Science & Business Media.
34. Yagiz, A.K., Yavuz, C., Tarim, C., Demirel, U., & Caliskan, M.E. (2020). Effects of growth regulators, media and explant types on microtuberization of potato. American Journal of Potato Research, 97(5), 523-530.‏
35. Yu, J., Wang, D., Geetha, N., Khawar, K.M., Jogaiah, S., & Mujtaba, M. (2021). Current trends and challenges in the synthesis and applications of chitosan-based nanocomposites for plants: A review. Carbohydrate Polymers, 261, 117904.‏