Investigating the CNC milling machine parameters and machining tool specifications on surface roughness of wooden products

علوم کاربردی و محاسباتی در مکانیک

Article 5, Volume 35, Issue 3 - Serial Number 33, October 2023, Pages 65-74   

Document Type: Original Article

DOI: 10.22067/jacsm.2023.81172.1167

Authors

Saeed Yaghoubi; Farshad Rabiei^*

Department of Mechanical Engineering, Faculty of Engineering, Ilam University, Ilam, Iran.

Abstract

Today, wooden products are widely spread in the industry of furniture, art boards, wooden dishes, etc. The traditional and manual manufacturing methods of producing these artefacts cannot compete with mechanized production methods, especially computer numerical control (CNC) machines. Therefore, using of these devices is always increasing. Nevertheless, one of the parameters that affect the production speed is the surface roughness, and the workshops have to spend a lot of time on polishing the products. For this reason, in the present research, the effect of machine parameters (feed speed, rotational speed and transverse step) and tool characteristics (diameter, number of cutting edge and type of cutting edge) on surface roughness of beech wood has been investigated. The outcomes demonstrated that cutting tools with two spiral cutting edges have a more favorable surface roughness than cutting tools with a straight cutting edge and one spiral cutting edge, and tools with a straight edge are not suitable for beech wood. It was also observed that by reducing the transverse step from 0.7D to 0.3D, a lower surface roughness is created. By reducing the tool diameter from 6 to 4 and 3 (mm), reducing the feed speed from 60 to 20 (mm/min) and increasing the rotational speed from 15000 to 25000 (rpm), the surface roughness of final product was improved, significantly.

Keywords

CNC Milling; Wooden Products; Cutting Edges Number; Step Over; Feed Speed; Rotational Speed

References

[1] A. A. Krimpenis, N. A. Fountas, T. Mantziouras, and N. M. Vaxevanidis, “Optimizing CNC wood milling operations with the use of genetic algorithms on CAM software,” Wood Material Science & Engineering, vol. 11, no. 2, pp. 102-115, 2014.

https://doi.org/10.1080/17480272.2014.961959

[2] S. Bharathi Raja, and N. Baskar, “Particle swarm optimization technique for determining optimal machining parameters of different work piece materials in turning operation,” The International Journal of Advanced Manufacturing Technology, vol. 54, no. 8, pp. 445–463, 2011.https://doi.org/10.1007/s00170-010-2958-y

 [3] A. Sutcu, and U. Karagoz, “The influence of process parameters on the surface roughness in aesthetic machining of wooden edge-glued panels (EGPs),” BioResources, vol. 8, no. 4, pp. 5435–5448, 2013.

[4] A. A. Krimpenis, and M. Chrysikos, “3D parametric design and CNC manufacturing of custom solid wood electric guitars using CAD/CAM technology,” Wood Material Science & Engineering, vol. 14, no. 2, pp. 66-80, 2019.

https://doi.org/10.1080/17480272.2017.1379035

[5] H. Pelit, M. Korkmaz, and M, Budakç, “Surface roughness of thermally treated wood cut with different parameters in CNC router machine,” BioResources, vol. 16, no. 3, pp. 5133-5147, 2021.

[6] M. Sedlecký, M. Kvietková, and R. Kminiak, “Medium-density fiberboard (MDF) and edge-glued panels (EGP) after edge milling-surface roughness after machining with different parameters,” BioResources, vol. 13, no. 1, pp. 2005-2021, 2018.

[7] H. Pelit, and Ö. Yaman, “Influence of processing parameters on the surface roughness of solid wood cut by abrasive water jet,” BioResources, vol. 15, no. 3, pp. 6135-6148, 2020.

[8] A. Jankowska, “Understanding of surface roughness of wood based on analysis its structure and density,” Annals of WULS Forestry and Wood Technology, vol. 111, pp. 27-31, 2020. doi: 10.5604/01.3001.0014.6421)

[9] E. Hazir, and K. H. Koc, “Optimization of wood machining parameters in CNC routers: Taguchi orthogonal array based simulated angling algorithm,” Maderas. Ciencia y tecnología, vol. 21, no. 4, pp. 493-510, 2019.

http://dx.doi.org/10.4067/S0718-221X2019005000406

[10] M. Aghakhani, A. Khazaeian, and M. Madhoshi, “Different CNC machining condition of paulownia wood by CNC; Influence on the abbott roughness parameters,” Iranian Journal of Wood and Paper Science Research, vol. 28, no. 2, pp. 301-312, 2013. (In persian). https://doi.org/10.22092/ijwpr.2013.2935