- Abbasiyan, B., Khorasani Ferdavani, M. E., & Zaki Dizaji, H. (2019). Design and construction process of a sugarcane Billet planter suitable for sugarcane industries in Khuzestan province. 12th National Conference on Biosystems Engineering and Mechanization. Ahvaz, Iran. (pp. 45-52). (in Persian).
- Akbarnia, A. (2017). Design and fabrication of an experimental model of a seeding unit with widthwise sugarcane scions seeding for use in sugarcane planter. Journal of Agricultural Machinery, 7(1), 312-321. (in Persian with English abstract). https://doi.org/10.22067/jam.v7i1.45290
- Almasi, M., Bakhoda, H., & Sahebi, Y. (2006). Design and construction of a sugarcane distributor and single-bud billet Planter. 04th National Conference on Agricultural Machinery Engineering and Mechanization, Tabriz, Iran (pp. 21-27) (in Persian with English abstract).
- Anonymous. (2018). Final report on cultivation with the new planter in Hakim Farabi Sugarcane Agro-Industries (quality and economic review). Applied research, Sugarcane & By Products Development Company. (in Persian).
- Bozorgi, A. (2014). Design, Construction, and evaluation of a Billet feeder system for sugarcane billet planter. Master's thesis, Isfahan University of Technology. Department of Biosystems Engineering. (in Persian with English abstract).
- Bronson, K., French, A., Conley, M., & Barnes, E. (2020). Use of an ultrasonic sensor for plant height estimation in irrigated cotton. Agronomy Journal, 113. https://doi.org/10.1002/agj2.20552
- Elwakeel, A. E., Mazrou, Y. S. A., Eissa, A. S., Okasha, A. M., Elmetwalli, A. H., Makhlouf, A. H., ..., & Elsayed, S. (2023). Design and Validation of a Variable-Rate Control Metering Mechanism and Smart Monitoring System for a High-Precision Sugarcane Transplanter. Agriculture, 13(12), 2218. https://doi.org/10.3390/agriculture13122218
- Han, J., Wen, S., Liu, Q. T., & Wu, J. Y. (2019). Design and test of pre-cutting type sugarcane planter. Journal of South China Agricultural University, 40(4), 109-118.
- Khani, M., Razavi, J., & Hemat, A. (2006). Design, Construction and evaluation of distributor for sugarcane Billet planter with overlapped pattern. Master's thesis, Isfahan University of Technology. (in Persian with English abstract).
- Khorasani Ferdavani, M. E., Alimaradni, R., & Omid, M. (2009). Design, Construction and Evaluation of Sugarcane Yield Monitoring System. Doctoral dissertation, University of Tehran. Department of Agricultural Machinery Engineering. (in Persian with English abstract).
- Mansouri, N., Zaki Dizaji, H., Sheikh Davoodi, M. J., & Asakare, A. (2019). Review and comparison of different methods of sugarcane stem planting under Khuzestan conditions. Agricultural Systems and Mechanization Research, 20(72), 73-90. (in Persian with English abstract). https://doi.org/10.22092/erams.2018.114606.1207
- Mohammadi, A., Almasi, M., & Sheikh Davoodi, M. J. (2002). Construction and testing of a sugarcane single-bander distributor. Master's thesis, Shahid Chamran University of Ahvaz. (in Persian with English abstract).
- Mostofi Sarkari, M., & Minaei, S. (2010). Performance evaluation of a continuous mass flow meter for harvesting machines of food products for use in precision agriculture. Journal of Agricultural Science and Sustainable Production, 2(2), 141-150.
- Namjoo, M., Razavı, J., & Khani, A. (2015). Fabrication and Evaluation of a Metering Device for a Sugarcane Billet Planter. Yuzuncu Yıl University Journal of Agricultural Sciences, 25(1), 1-12. https://doi.org/10.29133/yyutbd.236386
- Razavi, S. J., Kardani, M., & Namjoo, M. (2013). Design, Development and evaluation of an Autonomous system for a sugarcane billet planter Hopper Lifting. 8th National Congress of Agricultural Machinery Engineering and Mechanization, Mashhad, Iran. (in Persian with English abstract).
- Saengprachatanarug, K., Wongpichet, S., Ueno, M., & Taira, E. (2016). Comparative Discharge and Precision Index of a Sugar Cane Billet Planter. Applied Engineering in Agriculture, 32, 561-567. https://doi.org/10.13031/aea.32.11073
- Soleimani Varposhti, I., Zaki Dizaji, H., & Sheikh Davoodi, M. J. (2019). Evaluation of precision metering device for Sugarcane billet planting machines. Journal of Researches in Mechanics of Agricultural Machinery, 8(2), 1-10. (in Persian with English abstract). https://jrmam.sku.ac.ir/article_10115.html?lang=en
- Taghinezhad, J., Alimardani, R., & Jafari, A. (2013). Optimization cane traction output from hopper in full-automatic sugarcane planters by using response surface modeling and analytical hierarchy process. Agricultural Engineering International: CIGR Journal, 15, 138-147.
- Taghinezhad, J., Alimardani, R., & Jafary, A. (2014). Development and evaluation of three metering device models for sugarcane setts. Tarım Bilimleri Dergisi. https://doi.org/10.1501/Tarimbil_0000001276
- Wang, Meimei & Liu, Qingting & Ou, Yinggang & Zou, Xiaoping. (2021). Experimental Study of the Seed-Filling Uniformity of Sugarcane Single-Bud Billet Planter. Sugar Tech. 23. https://doi.org/10.1007/s12355-020-00947-3
- Wang, M., Liu, Q., Ou, Y., & Zou, X. (2022). Numerical simulation and verification of seed-filling performance of single-bud billet sugarcane seed-metering device based on EDEM. Agriculture, 12(7), 983. https://doi.org/10.3390/agriculture12070983
- Wang, M., Liu, Q., Yinggang, O., & Zou, X. (2022). Experimental Study of the Planting Uniformity of Sugarcane. Agriculture, 12. https://doi.org/10.3390/agriculture12070908
|
