Mechanical Behavior of Composite Sandwich Bridge Decks with Hybrid FRP-Steel Core

مهندسی عمران فردوسی

Article 7, Volume 26, Issue 2, August 2015, Pages 99-116   

Document Type: پژوهشی

DOI: 10.22067/civil.v26i2.21182

Authors

Elham Alizadeh; Mehdi Dehestani^* ; Bahram Navayinia

Department of Civil Engineering, Babol Noshirvani University of Technology, Babol.

Abstract

Design of bridge deck with long-term strength, durability and permanence is a significant interest for engineers. One applicable solution to this challenge could be via using hybrid system consisting of conventional materials such as concrete and steel with FRP plates which is also known as composite deck. Since these deck are relatively new so their performance is not completely known. The present study is dedicated to composite deck consists of a steel core and GFRP plates. This composite sandwich bridge deck system is composed of wrapped hybrid core of GFRP grid and multiple steel box cells with upper and lower GFRP facings. The structural performance of deck was evaluated by nonlinear finite element method and numerical results have been compared with available experimental results where possible. After ensuring the validity of numerical modeling of composite deck, parametric studies such as change in geometry, steel core shape and mechanical properties of materials have been done. It was found that failure mode of the proposed hybrid deck was more favorable because of the yielding of the steel tube when compared with that of absolute GFRP decks. Increasing the thickness and changing the steel core geometry can improve the ultimate load capacity of the deck. The grid layer has the maximum thickness among the GFRP layers and therefore ultimate load capacity of the deck enhanced by increase the elastic modulus of grid layer.

Keywords

Composite bridge decks; FRP; Steel core; Grid system; Finite Element Method

References

Kim. H.Y, Jeong. Y. J, "Experimental investigation on behaviour of steel–concrete composite bridge decks with perfobond ribs", Journal of Constructional Steel Research, Vol. 62, pp.463-471, (2006).

2. Brown. D. L, Berman. J. W, "Fatigue and Strength Evaluation of Two Glass Fiber-Reinforced Polymer Bridge Decks", Journal of bridge engineering, ASCE,Vol 14, pp. 493-503, (2010).

3. Versace. J, Ramirez. J, "Implementation of Full-Width Bridge Deck Panels, A Synthesis", Publication FHWA/IN/JTRP, Joint Transportation Research program, Indiana Department of Transportation and Purdue University, Paper 116, (2004).

4. Kim. H.Y, Jeong. Y. J, "Ultimate strength of a steel-concrete composite bridge deck slab with profiled sheeting", Engineering Structures Elsevier, (2009).

5. Ji. H. S, Son. B. J, Ma. Z, "Evaluation of Composite Sandwich Bridge Decks with Hybrid FRP-Steel Core", Journal of Bridge Engineering, Vol. 14, No. 1, (2009).

6. Gan. L. H, Ye. L, Mai. Y. W, "Design and evaluation of various section profiles for pultruded deck panels", Composite Structures 47, Elsevier, pp.719-725, (2000).

7. Reising. R, Shahrooz. B, "Close Look at Construction Issues and Performance of Four Fiber-Reinforced Polymer Composite Bridge Decks", Journal of Composite for Construction, (2004).

8. Kim. H. Y, Hwang. Y. K, Park. K, "Fiber reinforced plastic deck profile for I-girder bridges", Journal of Composite Structures 67, pp. 411–416, (2005).

9. Jeong. J, Lee. Y. H, Park. K, "Field and laboratory performance of a rectangular shaped glass fiber reinforced polymer deck", Journal of Composite Structures 81, Vol 81, pp. 622–628, (2007).

10. Brown. D. L, Berman. J. W, "Fatigue and Strength Evaluation of Two Glass Fiber-Reinforced Polymer Bridge Decks", Journal Of Bridge Engineering Asce, (2010).

11. Ji. H. S, Song. W, Ma. Z. J," Design, test and field application of a GFRP corrugated-core sandwich bridge", Journal of Engineering Structures Elsevier, Vol. 32, pp. 2814-2824, (2010).

12. Hillman, J. R., and Murray, T. M., "Innovative floor systems for steel framed buildings", International Association for Bridge and Structural Engineering, Zurich, Switzerland, Vol 60, pp. 672– 675, (1990).

13. Bakeri, P. A., and Sunder, S. S., "Concepts for hybrid FRP bridge deck systems" Serviceability and Durability of Construction Materials; Proc., 1st Materials Engineering Congress , ASCE, New York, 2, pp. 1006 –1015, (1990).

14. Saiidi, M., Gordaninejad, F., and Wehbe, N., "Behavior of graphite/epoxy concrete composite beams", J. Struct. Eng, pp. 2958 –2976, (1994).

15. Deskovic. N, Meier. U, "Innovative design of FRP combined with concrete", Journal of Structural Engineering, Vol. 121, No. 7, July 1995, pp. 1069-1078, (1995).

16. Kitane. Y, Aref. A. J, Lee. G, "Static and Fatigue Testing of Hybrid Fiber-Rein forced Polymer –Concrete Bridge", Superstructure Journal of Composite for Construction, Vol. 8, No. 2, pp. 182-190, ASCE, (2004).

17. Warn. G. P, Aref. A. J, "Sustained-Load and Fatigue Performance of Hybrid FRP-Concrete Bridge Deck System", Journal of Composites for Construction, Vol. 14, No. 6, December, (2010).

18. He. J, Liu. Y, Chen. A, Dai. L, "Experimental investigation of movable hybrid GFRP and concrete bridge deck", Journal of Construction and Building Materials, Vol. 26, pp. 49–64, (2012).

19. Ji. H. S, Byun. J. K, Lee. C. S, "Structural performance of composite sandwich bridge decks with hybrid GFRP–steel core", Journal of Composite Structures 93, Vol. 93, pp. 430–442, (2011).

20. Ministry of Construction and Transportation (MOCT), "Standards specifications for highway bridge", 2nd Ed., South Korea, (2000).

21. ANSYS 2012, ANSYS Help.

22. جاهد مطلق. ح، نوبان. م، اشراقی. م،" اجزای محدود ANSYS "، انتشارات دانشگاه تهران، چاپ پنجم، (1390).