Study of genesis in Qahr-Abad fluorite deposit using fluid inclusion, southeast of Saqqez, the Kurdistan province

زمین شناسی اقتصادی

Article 7, Volume 9, Issue 1 - Serial Number 16, July 2017, Pages 235-248   

Document Type: Research Article

DOI: 10.22067/econg.v9i1.25875

Authors

Mehrdad Barati^{* 1}; Ebrahim Tale Fazel¹; Afshin Akbarpour²; Babak Talaei³; Masoud Moslehi¹

¹Bu-Ali Sina

²Geological Survey and Mineral Exploration of Iran

³Shiraz

Abstract

Introduction
The Qahr-abad fluorite deposit is located in the area of 36°10′ 3′′ N and 46°34′ 21′′E within the Sanandaj-Sirjan district east of the Kurdistan province , Iran and it is located ~57 km southeast of the city of Saqqez (Kholghi Khasraghi, 1999). This deposit is developed as scatter lenses, veins, and veinlets (stockwork structure) within carbonate rocks of Elika formation and controlled by the regional NW–SE trending Zagross thrust nappe system. Fault trends in this area are perpendicular to fault trends in the Zagros zone. The fault dips are nearly vertical and mineralization has occurred in the brecciation fault zone (Talaii, 2010). The rough geological instruction of the deposit has indicated that it is similar to worldwide Epithermal deposits.
The mineralization occurs as replacement (type I)/ open-space (type II) vein fillings and bodies within Mesozoic lime stones (mostly Upper Triassic and Lower Jurassic members of the Elika Formation), where they crop out to form horst structures. The mineralization is typically associated with post Pliocene disjunctive faults, which in part appear to have served as channel ways for the fluorite forming fluids that are representative of the geological setting of the mineralized area.
Fluorite occurs in several color variations such as green, violet, blue, white or colorless, and is accompanied by quartz, barite and calcite (Moslehi, 2013).

Materials and methods
The minerals sampled for the fluid inclusion study include fluorite from mineralization stages. Samples covered all ore types. Micro thermometry analyses for 23 samples were performed after careful microscopic observation of 35 sections and 30 doubly polished sections. Micro thermometry was undertaken using a Linkam THS600 heating-freezing stage, with a measurable temperature range of between −196 and +600 °C (precision of freezing data and homogenization temperature of ±0.2 °C). Micro thermometry was undertaken in the Department of geology of the Karazmy University.

Results
Petrography and classification of inclusions:
The samples used for the inclusion study were doubly polished sections of fluorite from mineralization stages 1 to 2. A number of inclusion types were identified. These include negative crystals and elongate round, polygonal or irregular shapes with a size range from

Keywords

Qahr-abad; fluorite deposit; fluid inclusions; Saqqez City; hydrothermal

References

Barnes, H.L., 1998. Geochemistry of hydrothermal ore deposits. John Wiley & Sons, Malaysia, 972 pp.

Guilbert, J.M. and Park, C.F., 1985. The geology of ore deposits. Freeman Publications, New York, 985 pp.

Haas, J.L., 1971. The effect of salinity on the maximum thermal gradient of a hydrothermal system in hydrostatic pressure. Economic Geology, 66(6):940–946.

Kholghi Khasraghi, M.H., 1999. Geological map of Irankhah. Scale 1:100,000. Geological Survey of Iran.

Moslehi, M., 2013. The study of fluid inclusion and geochemistry of Qahr-Abad Soliman deposit in Kurdistan province. M.Sc. Thesis, Bu-Ali Sina University, Hamedan, Iran, 142 pp. (in Persian with English abstract)

Rajabzadeh, M.A., 2007. A fluid inclusion study of a large MVT barite–fluorite deposit: Komshecheh, Central Iran. Iranian Journal of Science and Technology, 31(1):73–87.

Roedder, E, 1984. Fluid inclusions, Reviews in Mineralogy. Mineralogical Society of America, American Restren, Virginia, 644 pp.

Shepherd, T.J, Rankin, A.H. and Alderton, A.H, 1985. A Practical Guide to Fluid Inclusion Studies. Blackie Publications, Glasgow, 239 pp.

Tajoddyn, H., Rastad, A., Yaghobpour, A. and Mohajel, M., 2010. The genesis of Barica Gold massive sulfide deposit, east of Sardasht, NW of metamorphic Sanandaj –Sirjan zone base on structure, texture and micro thermometric studies. Journal of Economic Geology, 2(1): 97-118.

Talaii, B., 2010. The study of mineralogy and geochemistry of Qahr-Abad fluorite deposit, SE of Sagez city, Kurdistan province. M.Sc. Thesis, University of Uromieh, Uromieh, Iran, 119 pp. (in Persian with English abstract)

Whitney, D.L. and Evans, B.W., 2010. Abbreviations for names of rock-forming minerals. American Mineralogist, 95(1): 185-187.

Wilkinson, J.J., 2001. Fluid inclusions in hydrothermal ore deposits. Lithos, 55(1-4):229–272.