Modeling Lead and Cadmium Sorption onto Sepiolite Using Response Surface Methodology

آب و خاک

Article 4, Volume 33, Issue 6 - Serial Number 68, January 2020, Pages 833-844   

Document Type: Research Article

DOI: 10.22067/jsw.v33i6.68143

Authors

M. piri¹; E. Sepehr^{* 2}; A. samadi; KH. Farhadi; M. Alizadeh khaled abad¹

¹urmia

²Urmia University

Abstract

Introduction: Some of the heavy metals such as cadmium (Cd) and lead (Pb) are toxic and represent hazardous pollutants due to their persistence in the environment. These metals have adverse effects on human health, which include growth retardation, cancer, damage to the nervous and heart system. Heavy metals can cause malfunctioning of the cellular processes via the displacement of essential metals from their respective sites. Mainly heavy metals discharge into the environment from industrial and urban sewage. There are different methods to reduce water pollution and the removal of heavy metals from water that one of them is sorption by using organic and inorganic adsorbents such as sepiolite. The low cost of sepiolite along with the high specific surface area, chemical and mechanical stability, and layered structure have made these clay minerals as excellent adsorbent materials for the removal of heavy metals from wastewaters. This study aims to investigate the sorption of Cd and Pb by sepiolite as an inorganic absorbent and optimize process variables (initial concentration, pH and ionic strength) using Response Surface Methodology (RSM) and Box–Behnken design (BBD).
 Materials and Methods: Response Surface Methodology (RSM) is a statistical method that uses quantitative data from appropriate experiments to determine regression model equations and operating conditions. RSM is a collection of mathematical and statistical techniques for modeling and analysis of problems in which a response of interest is influenced by several variables. A standard RSM design called Box-Behnken Design (BBD) was applied in this work to study the variables for sorption of Cd and Pb by sepiolite from aqueous solution using a batch process. BBD for three variables (initial Cd and Pb concentrations, pH and ionic strength), each with two levels (the minimum and maximum), was used as an experimental design model. Sepiolite sample used in this study was taken from a mine in Fariman region, northeastern Iran. In the experimental design model, initial concentration (0-200 mg­ L-1), pH (3-6) and ionic strength (0.01-0.06­ mol L-1) were taken as input variables. Design-Expert program was used for regression and graphical analysis of the data obtained. The optimum values of the selected variables were obtained by solving the regression equation and by analyzing the response surface contour plots. The variability independent variables were explained by the multiple coefficients of determination, R­2 and the model equation was used to predict the optimum value and subsequently to elucidate the interaction between the factors within the specified range.
Results: The results showed that the sorption of Cd and Pb intensified by increasing initial concentration and pH but ionic strength had an inverse effect. The sorption of Pb and Cd ions onto the sepiolite minerals were lowest at pH =3 and IS=0.06 but increased with an increase in pH and initial concentration of the solution. High value for R2 (0.99) and adjusted R2 (0.99) showed that the removal of Cd and Pb can be described by the response surface method. One-way ANOVA showed (p< 0.0001) that the quadratic model is the best model for determining the interaction variables. According to optimization results, the sorption of Cd and Pb are maximized when pH: 6, concentration: 200 mg.L-1 and ionic strength: 0.02 mol.L-1. The predicted adsorption at these settings for Pb and Cd are 44.4 and 34.28 mg.g-1, respectively. It was found that the initial concentration is the most effective parameter in the sorption of Cd and Pb by sepiolite. Sepiolite adsorbed more lead ions than cadmium ions from aqueous solution.
Conclusion: Response surface methodology using BBD, proved a very effective and time-saving model for studying the influence of process parameters (pH, initial concentration and ionic strength) on response factor (sorb). This model significantly reduces the number of experiments and hence facilitating the optimum conditions. The experimental values and the predicted values are in perfect match with an R2 value of 0.99. The high correlation coefficient between the model and experimental data (R2=0.99) showed that the model was able to predict the removal of Cd and Pb from aqueous solution by using sepiolite. The model revealed that concentration, metal type and pH were the most effective parameters on the response yield (adsorption by sepiolite), respectively. According to the results, sepiolite showed a greater efficiency for sorption of Cd and Pb from aqueous solution, also usage of sepiolite as an inorganic absorbent due to its low cost and abundance can be economically justified.

Keywords

Keywords: Box-Behnken design (BBD); Heavy metals; Sepiolite; Water Pollution

References

1- Al-Degs A., Kharasheh M.A.M., and Tutunji M.F. 2001. Sorption of lead ions on diatomite and manganes oxides modified diatomite. Water Research 35: 3724-3728.

2- Asci Y., Nurbas M., and Acikel Y.S. 2007. Sorption of Cd (II) onto kaolinite as a soil component and desorption of Cd (II) from kaolin using amnolipid bio surfactant. Journal of Hazardous Materials 139: 50–56.

3- Chiban M., Zerbet M., Carja G., and Sinan F. 2011. Application of low-cost adsorbents for arsenic removal: A review. Journal of Environmental Chemistry and Ecotoxicology 4(5): 91-102.

4- Chowdhury S., and Saha P. 2010. Sea shell powder as a new adsorbent to remove Basic Green 4 (Malachite Green) from aqueous solutions: Equilibrium, kinetic and thermodynamic studies. Chemical Engineering Journal 164(1): 168-77.

5- Davis T.A.,Volesky B., and Vieira R.H.S.F. 2000. Sargassum seaweed as biosorbent for heavy metals. Water Research 34 (17): 4270-4278.

6- Deng S.B., and Ting Y.P. 2005. Characterization of PEI-modified biomass and biosorption of Cu (II), Pb(II) and Ni(II). Water Research 39: 2167–2177.

7- Dermentzis K., Christoforidis A. and Valsamidou E. 2011. Removal of nickel, copper, zinc and chromium from synthetic and industrial wastewater by electrocoagulation. International Journal of Environmental Sciences 1: 697-510.

8- Elouear Z., Bouzid J., Boujelben N., Fekri M., and Montiel A. 2008. The use of exhausted olive cake ash (EOCA) as a low cost adsorbent for removal of toxic ions from aqueous solutions. Fuel 87: 2582-2589.

9- El-Naas M.H, Abu Al-Rub F, Ashour A.Al., and Marzouqi M. 2007. Effect of competitive interference on the biosorption of lead(II) by Chlorella vulgaris. Chemical Engineering and Processing: Process Intensification 46(12): 1391–1399.

10- El-Sayed G.O., Dessouki H.A., and Ibrahim S.S. 2010. Biosorption of Ni (II) And Cd (II) ions from aqueous solutions onto rice straw. Journal Chemical Sciences 9: 1-11.

11- Franus M., and Bandura L. 2014. Sorption of Heavy Metal Ions from Aqueous Solution by Glauconite. Fresenius Environmental Bulletin 23 (3A): 825-839.

12- Galan E. 1996. Properties and applications of palygorskite-sepiolite clays. Clay Minerals 31: 443–453.

13- Hojati S., and Khademi H. 2012. Physicochemical and Mineralogical Characteristics of Sepiolite Deposits of Northeastern Iran. Scientific Quarterly Journal 23(90): 165-251.

14- Katsou E., Malamis S., and Haralambous K.J. 2011. Industrial wastewater pre-treatment for heavy metal reduction by employing a sorbent-assisted ultrafiltration system. Chemosphere 82(4): 557-64.

15- Khademi H., and Mermut A.R. 1998. Sub microscopy and stable isotope geochemistry of carbonates and associated palygorskite in selected Iranian Aridisols. European Journal of Soil Science 50: 207-216.

16- Khraisheh M.A.M., Al-degs Y., and Meminn. 2004. Remediation of wastewater containing heavy metals using raw and modified diatomite. Chemical Engineering 99: 177-184.

17- Kocaoba S. 2009. Adsorption of Cd(II), Cr(III) and Mn(II) on natural sepiolite. Desalination, 244: 24-30.

18- Lazarević S., Janković-Častvan I., Jovanović D., Milonjić S., Janaćković D., and Petrović R. 2007. Adsorption of Pb+2, Cd+2 and Sr+2 ions onto natural and acid-activated sepiolites. Applied Clay Science 37: 47–57.

19- Lui A., and Richard G. 1999. Modeling adsorption of copper, cadmium and lead on purified humic acid. American Chemical Society 16: 3902-3909.

20- Malairajan S., and Peters E. 2013. Removal of toxic heavy metals from synthetic wastewater using a novel biocarbon technology. Journal of Environmental Chemical Engineering 4: 629-1384.

21- Marandi R., and Amir Afshar H. 1387. Biological uptake of Zn(II) and Pb(II) by non-living biomass Phanerochaete chrysosporium. Environmental Science and Technology 10 (4): 196-206.

22- Sanchez A.G., Ayuso E.A., and De Blas O.J. 1999. Sorption of heavy metals from industrial waste water by low-cost mineral silicates. Clay Minerals 34: 469-477.

23- Schulze D.G. 1989. An introduction to soil mineralogy. In: Dixon, J.B., and Weed, S.B. (Eds.), Minerals in soil Environments. Soil Science Society of America, Madison. pp. 1-34.

24- Sengil I.A., and Özacar M. 2009. Competitive biosorption of Pb(II), Cu(II) and Zn(II) ions from aqueous solutions onto valonia tannin resin. Journal of Hazardous Materials 166(2-3): 1488-1494.

25- Sharifipour F., Hojati S., Landi A., and Faz Cano A. 2014. Removal of Lead from Aqueous Solutions Using Iranian Natural Sepiolite: Effects of Contact Time, Temperature, pH, Dose and Heat-Pretreatments. Agricultural Journal 38(1): 135-147.

26- Shi W., Shao H., Li H., Shao M., and Du S. 2009. Progress in the remediation of hazardous heavy metal-polluted soils by natural zeolite. Journal of Hazardous Materials 170: 1-6.

27- Shirvani M., Kalbasi M., Shariatmadari H., Nourbakhsh F., and Najafi B. 2006. Sorption–desorption of cadmium in aqueous palygorskite, sepiolite, and calcite suspensions: Isotherm hysteresis. Chemosphere 65: 2178–2184.

28- Singanan M., and Peters E. 2013. Removal of toxic heavy metals from synthetic wastewater using a novel biocarbon technology. Journal of Environmental Chemical Engineering 1(4): 884-90.

29- Singer A., Stahr K., and Zarei M. 1998. Characteristics and origin of sepiolite (Meerschaum) from Central Somalia. Clay Minerals 33: 349-362.

30- Thomas G.W. 1982. Exchangeable cations. pp 159-164. In: Page, A. L. et al. (Eds). Methods of Soil Analysis, ASA, SSSA, Madison, WI.

31- Yavuz O., Guzel R., Aydin F., Tegin I., and Ziyadanogullari R. 2007. Removal of cadmium and lead from aqueous solution by calcite. Polish Journal of Environ 16(3): 467-471.

32- Yalcin H., and Bozkaya O. 1995. Sepiolite-palygorskite from the Hekimhan region (Turkey). Clays and Clay Minerals 43: 705-717.

33- Zhou J.L., and Kiff R.J. 1991.The uptake of copper from aqueous solution by immobilized. Journal of Chemical Technology and Biotechnology 52: 317–330.

34- Zolgharnein J., Shahmoradi A., and Ghasemi J.B. 2013. Comparative study of Box–Behnken, central composite, and Doehlert matrix for multivariate optimization of Pb(II) adsorption onto Robinia tree leaves. Journal of Chemometrics 27(1): 12-20.