Probabilistic Analysis of Immediate Settlement of a Rectangular Foundation Using Various Reliability Software

مهندسی عمران فردوسی

Article 2, Volume 33, Issue 3 - Serial Number 31, October 2020, Pages 17-30   

Document Type: پژوهشی

DOI: 10.22067/civil.v33i3.88206

Authors

Hadi Fattahi^{* 1}; Fateme Jiryaee^{* 2}; Sam Mehrnia^{* 2}

¹Rock Mechanics, Department of Earth Sciences Engineering, Arak University of Technology, Arak, Iran.

²Department of Earth Sciences Engineering, Arak University of Technology, Arak, Iran.

Abstract

Study of immediate settlement of a rectangular foundation with the task of transferring structural forces to the ground, is one of the important factors in the design of structures. Due to its heterogeneous and anisotropicnature, soil parameters have highuncertainties, the omission of which in estimating the settlement of foundation, creates challenges in the analysis of structural stability. Therefore, the use of reliability methods with the ability to accept uncertainties and reliable stability analysis of geotechnical issues are welcomed today. In this study, in order to estimate the probability of failure due to settlement of rectangular foundation, first-order and second-order reliability methods as well as Monte Carlo simulations were used and the relevant analysis were performed in RT and @Risk software.The results indicate a high probability of failure related to the foundation settlement (9.5%). The second-order methods and Monte Carlo simulations provide more accurate results due to the non-linearity of the limit state procedure. In addition, the sensitivity analysis of random variables based on sensitivity vectors showed that thecontact stress (q_o), has an important role in the probability of failure, and then the Poisson’s ratio is important.

Keywords

Probability of failure; RT software @; Risk software; Surface foundations meeting

Supplementary Files

2-fatahi-edited.pdf

References

1.  Casagrande, A. and Carillo, N., "Shear failure of anisotropic materials", Journal of Boston Society of Civil Engineers, Vol. 31, No. 4, pp. 74-81, (1944).

2.  Zeng, P., Jimenez, R., and Li, T., "An efficient quasi-Newton approximation-based SORM to estimate the reliability of geotechnical problems", Computers and Geotechnics, Vol. 76, No. pp. 33-42, (2016).

3.  Zhang, S., Zhong, L., and Xu, Z., "Reliability of foundation pile based on settlement and a parameter sensitivity analysis", Mathematical Problems in Engineering, Vol. 2016, No. 1 (2016).

4.  Ahmed, A. Y., Nowak, A. S., and Szerszen, M. M., Reliability Analysis for Settlement of Shallow Bridge Foundations, in IFCEE 2018. Vol. 1, Pp.463-473, (2018).

5.  Haldar, A. and Mahadevan, S., Probability, reliability, and statistical methods in engineering design. 2000: John Wiley.

6.  Li, H.-Z. and Low, B. K., "Reliability analysis of circular tunnel under hydrostatic stress field", Computers and Geotechnics, Vol. 37, No. 1-2, pp. 50-58, (2010).

7.  Sivakumar Babu, G., Srivastava, A., and Murthy, D. S., "Reliability analysis of the bearing capacity of a shallow foundation resting on cohesive soil", Canadian Geotechnical Journal, Vol. 43, No. 2, pp. 217-223, (2006).

8.  Griffiths, D. and Fenton, G. A., The random finite element method (RFEM) in slope stability analysis, in Probabilistic methods in geotechnical engineering. 2007, Springer. p. 317-346.

9.  Griffiths, D. V. and Fenton, G., "Risk assessment in geotechnical engineering", John wiley&Sons, Inc, Vol. 1, No. 1, pp. 381-400, (2008).

10.       Li, D., et al., "A system reliability approach for evaluating stability of rock wedges with correlated failure modes", Computers and Geotechnics, Vol. 36, No. 8, pp. 1298-1307, (2009).

11.  Jha, S. K. and Suzuki, K., "Reliability analysis of soil liquefaction based on standard penetration test", Computers and Geotechnics, Vol. 36, No. 4, pp. 589-596, (2009).

12.  Xue, J. and Nag, D., "Reliability analysis of shallow foundations subjected to varied inclined loads", Geotechnical Safety and Risk. ISGSR 2011, Vol. 1, No. 1, pp. 377-384, (2011).

13.  Ching, J., et al., "Reliability-based design for allowable bearing capacity of footings on rock masses by considering angle of distortion", International Journal of Rock Mechanics and Mining Sciences, Vol. 48, No. 5, pp. 728-740, (2011).

14.  Chan, C. L. and Low, B. K., "Probabilistic analysis of laterally loaded piles using response surface and neural network approaches", Computers and Geotechnics, Vol. 43, No. pp. 101-110, (2012).

15.  Zevgolis, I. E. and Bourdeau, P. L., "Reliability and redundancy of the internal stability of reinforced soil walls", Computers and Geotechnics, Vol. 84, No. pp. 152-163, (2017).

16.  Johari, A. and Sabzi, A., "Reliability analysis of foundation settlement by stochastic response surface and random finite-element method", Scientia Iranica. Transaction A, Civil Engineering, Vol. 24, No. 6, pp. 2741-2751, (2017).

17.  Nazarzadeh, M. and Sarbishe-ee, S., "Probabilistic Analysis of Shallow Foundation Settlement considering Soil Parameters Uncertainty Effects", Open Journal of Geology, Vol. 7, No. 05, pp. 731, (2017).

18.  Shakir, R. R., "Probabilistic-based analysis of a shallow square footing using Monte Carlo simulation", Engineering Science and Technology, an International Journal, Vol. 22, No. 1, pp. 313-333, (2019).

19.  Park, H. and West, T., "Development of a probabilistic approach for rock wedge failure", Engineering Geology, Vol. 59, No. 3-4, pp. 233-251, (2001).

20.  Das, B., Principles of Foundation Engineering 8th Ed. Instructor. Vol. 201605. 2014: Nelson.

21.  Rowe, R. and Booker, J., "The elastic displacements of single and multiple underream anchors in a Gibson soil", Geotechnique, Vol. 31, No. 1, pp. 125-142, (1981).

22.  Chan, C. L. and Low, B. K., "Practical second‐order reliability analysis applied to foundation engineering", International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 36, No. 11, pp. 1387-1409, (2012).