- Raheel, M.M., “A theoretical, experimental and CFD analysis of regenerative flow compressors and pumps for microturbine and automotive fuel applications”, Michigan State University, (2003).
- Engeda, A. and Raheel, M., “Theory and design of the regenerative flow compressor”, In Proceedings of the International Gas Turbine Congress, November, (2003).
- Badami, M. and Mura, M., “Setup and validation of a regenerative compressor model applied to different devices”, Energy Conversion and Management, 52(5), pp. 2157-2164, (2011).
- Song, J.W., Raheel, M. and Engeda, A., “A compressible flow theory for regenerative compressors with aerofoil blades. Proceedings of the Institution of Mechanical Engineers”, Part C: Journal of Mechanical Engineering Science, 217(11), pp. 1241-1257, (2003).
- Badami, M. and Mura, M., “Theoretical model with experimental validation of a regenerative blower for hydrogen recirculation in a PEM fuel cell system”, Energy Conversion and Management, 51(3), pp. 553-560, (2010).
- Lee, C., Kil, H.G. and Kim, K.Y., “The performance analysis method with new pressure loss and leakage flow models of regenerative blower”, International Journal of Fluid Machinery and Systems, 8(4), pp.221-229, (2015).
- Grabow, G., “Influence of the number of vanes and vane angle on the suction behavior of regenerative pumps”, In 5th Conference on Fluid Machinery, Vol. 1, pp. 351-364, (1975).
- Song, J.W., Engeda, A. and Chung, M.K., “A modified theory for the flow mechanism in a regenerative flow pump. Proceedings of the Institution of Mechanical Engineers”, Part A: Journal of Power and Energy, 217(3), pp.311-321, (2003).
- Meakhail, T. and Park, S.O., “An improved theory for regenerative pump performance. Proceedings of the Institution of Mechanical Engineers”, Part A: Journal of Power and Energy, 219(3), pp.
213-222, (2005).
- Raheel, M.M., “A theoretical, experimental and CFD analysis of regenerative flow compressors and pumps for microturbine and automotive fuel applications”, (1969).
- Sixsmith, H. and Altmann, H., “A regenerative compressor”, ASME, J. Engineering for Industry, Vol. 99, pp. 637-647, (1997).
- Nejadali, J., “Calculation of flow in incompressible regenerative turbo-machines with bucket form blades based on the geometry of flow path”, International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 29(8), pp. 2606-2621, (2019).
- Badami, M. and Mura, M., “Comparison between 3D and 1D simulations of a regenerative blower for fuel cell applications”, Energy Conversion and Management, Vol. 55, pp. 93-100, (2012).
- Zhang, F., Appiah, D., Hong, F., Zhang, J., Yuan, S., Adu-Poku, K.A. and Wei, X., “Energy loss evaluation in a side channel pump under different wrapping angles using entropy production method”, International Communications in Heat and Mass Transfer, Vol. 113, p. 104526, (2020).
- Nejad, J., Riasi, A. and Nourbakhsh, A., “Efficiency improvement of regenerative pump using blade profile modification: Experimental study”, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Vol. 233(3), pp. 448-455, (2019).
- Heo, M.W., Seo, T.W., Shim, H.S. and Kim, K.Y., “Optimization of a regenerative blower to enhance aerodynamic and aeroacoustic performance”, Journal of Mechanical Science and Technology, Vol. 30(3), pp. 1197-1208, (2016).
- Wang, C.H. and Choi, C.H., “Optimized design of regenerative blowers for enhanced efficiency”, In ASME International Mechanical Engineering Congress and Exposition, Vol. 44441, pp. 1241-1248, (2010).
- Choon-Man, J. and Jong-Sung, L., “Shape optimization of a regenerative blower used for building fuel cell system”, Open Journal of Fluid Dynamics, (2012).
- Mekhail, T.A.M., Dahab, O.M., Sadik, M.F., El-Gendi, M.M. and Abdel-Mohsen, H.S., “Theoretical, experimental and numerical investigations of the effect of inlet blade angle on the performance of regenerative blowers”, Open Journal of Fluid Dynamics, Vol. 5(03), p. 224, (2015),
- Griffini D, Salvadori S, Carnevale M, Cappelletti A, Ottanelli L, Martelli F., “On the development of an efficient regenerative compressor”, Energy Procedia, 2015 Dec 1; 82:252-7, (2015).
- Zhang, F., Böhle, M. and Yuan, S., “Experimental investigation on the performance of a side channel pump under gas–liquid two-phase flow operating condition”, Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, Vol. 231(7), pp. 645-653, (2017).
- Moradi, R., Habib, E., Bocci, E. and Cioccolanti, L., “Investigation on the use of a novel regenerative flow turbine in a micro-scale Organic Rankine Cycle unit”, Energy, Vol. 210, p. 118519, (2020).
- Cantini, G. and Salvadori, S., “Numerical Characterization of the Performance Curve of a Regenerative Pump-as-Turbine”, Journal of Engineering for Gas Turbines and Power, Vol. 143(5), p. 051001, (2021).
- مفاخری, میثم، محمودی، مصطفی، جهرمی، مهدی، "شبیه‌سازی عددی اثر لقی نوک پره بر عملکرد کمپرسور جریان محوری. نشریه پژوهشی مهندسی مکانیک ایران"، 96-122: 19(2)؛ (1396).
- مجدم، محمد، حاجیلوی بنیسی، علی، "مطالعۀ نظری و تجربی جریان در محفظۀ حلزونی کمپرسور جریان شعاعی"، علوم کاربردی و محاسباتی در مکانیک، 1-14: 28(1)؛ (1395).
- Jang, C.M. and Han, G.Y., “Enhancement of performance by blade optimization in two-stage ring blower”, Journal of Thermal Science, Vol. 19(5), pp. 383-389, (2010).
- صنیعی‌نژاد، مهدی، "مبانی جریان‌های آشفته و مدل‌سازی آن‌ها"، کتاب، انتشارات دانش‌نگار، چاپ دوم (1398)
- Raheel, M. and Engeda, A., “Performance characteristics of regenerative flow compressors for natural gas compression application”, Journal of Energy Resources Technology, Vol. 127(1), pp. 7-14, (2005).
- Raheel, M., Engeda, A., Hamrin, D. and Rouse, G., “The performance characteristics of single-stage and multistage regenerative flow compressors for natural gas compression application”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 217(11), pp. 1221-1239, (2003).
|
