An Experimental Study on Mechanical properties and Durability of Concrete with Recycled Aggregate Concrete and Zeolite

مهندسی عمران فردوسی

Article 2, Volume 33, Issue 4 - Serial Number 32, December 2020, Pages 15-32   

Document Type: پژوهشی

DOI: 10.22067/jfcei.2021.61272.0

Authors

Masoud Saadatkhosh^{* 1}; Mahdi Arezoumandi²; Shaghayegh Afshar³

¹Shahab Danesh University, Qom, Iran.

².Shahab Danesh University, Qom, Iran

³Shahab Danesh University, Qom, Iran

Abstract

Recently, there has been an increasing trend toward the use of sustainable materials. Sustainability helps the environment by reducing the consumption of non-renewable natural resources. Concrete – the second most consumed material in the world after water – uses a significant amount of non-renewable resources. Efforts aimed at producing environmentally friendly concrete can play a major role in securing sustainable construction.Candidate technologies for sustainable concrete materials include the incorporation of supplementary cementitious materials (SCMs) as a partial replacement for Portland cement; as well as recycled materials in concrete production. As a result, an experimental investigation was conducted to study the mechanical properties and durability of concrete constructed with 15% and 30% recycled aggregate concrete as well as 10% zeolite. This experimental program consisted of fourteen mix designs. Thecompressive strength,split tensile strength, electrical resistivity and chloride ion penetration of recycled concrete mixes were compared with the conventional concrete. Results of this study show that the zeolite and recycled aggregate concrete increased compressive strength,split tensile strength and electrical resistivity also decreased chloride ion penetration of concrete. To overcome inferior durability andmechanical properties of recycled mixes, zeolite (10%) has been added to recycled mixes. Results of the mixes including both recycled aggregate concrete and zeolite show superior durability (both electrical resistivity and chloride ion penetration) compared with the conventional concrete.

Keywords

Recycled aggregate concrete; Zeolite; Mechanical properties of recycled concrete; Durability of recycled concrete

Supplementary Files

400-CE(33-4)-2-sadarkhosh-Revised.pdf

References

1. Initiative, C. S., Recycling Concrete: Executive summary. World Business Council for Sustainable Development, http://www. wbcsdcement. org /pdf/CSI-Recycling Concrete-Summary. (accessed: 11/11. 15), (2009).
2. Gonzalez, G., Moo-Young, H., "Transportation Applications of Recycled Concrete Aggregate, FHWA State of the Practice National Review", Washington DC: Federal Highway Administration, Vol.12, pp. 1-47, (2004).
3. Meyer, C., "The greening of the concrete industry", Cement and concrete composites, Vol. 31, No.8, pp. 601-605, (2009).
4. طالقانی، جعفر،، " مسائل و مشکلات تولید سیمان های مخلوط (پوزولانی)"، انستیتوی استاندارد و تحقیقات صنعتی ایران، (1371).
   1. Sabet, F. A., Libre, N. A., Shekarchi, M., "Mechanical and durability properties of self-consolidating high-performance concrete incorporating natural zeolite", silica fume and fly ash. Construction and Building Materials, Vol. 44, pp. 175-184, (2013).
   2. 212, ACI Committee. 'Report on Chemical Admixtures for Concrete', American Concrete Institute (ACI 212.3R-10), Penetron International, East Setauket, NY, USA. (2010)
   3. ISR 4977 1st.Revision, Aggregates - Sieve Analysis of Fine and Coarse Aggregates -Test Method, (2015).
   4. Saini, M., Goel, S., "Strength and Permeability of Recycled Aggregate Concrete Containing Silica Fumes", International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Vol. 5, pp. 5-10, (2016).
   5. Cartuxo, F., de Brito, J., Evangelista, L., Jiménez, J. R., Ledesma, E. F., "Increased durability of concrete made with fine recycled concrete aggregates using superplasticizers", Materials, Vol. 9, No.2, pp. 1-26, (2016).
   6. Najimi, M., Sobhani, J., Ahmadi, B., Shekarchi, M., "An experimental study on durability properties of concrete containing zeolite as a highly reactive natural pozzolan", Construction and Building Materials, Vol. 35, pp. 1023-1033, (2012).
   7. Vaičiukynienė, Danutė, Gintautas Skipkiūnas. Vytautas Sasnauskas, and Mindaugas Daukšys, "Cement compositions with modified hydrosodalite", chemija, No. 3, Vol. 23, pp. 147-154, (2012).
   8. Somna, R., Jaturapitakkul, C., Amde, A. M., "Effect of ground fly ash and ground bagasse ash on the durability of recycled aggregate concrete", Cement and Concrete Composites, Vol. 34, No.7, pp 848-854, (2012).
   9. Nagrockiene, D., and Giedrius, G., "Research into the properties of concrete modified with natural zeolite addition", Construction and Building Materials, Vol. 113, pp. 964-969, (2016).
   10. Eskandari, H., Mohammad, V., Kowsari, K., "Investigation of Mechanical and Durability Properties of Concrete Influenced by Hybrid Nano Silica and Micro Zeolite", Procedia Materials Science, Vol. 11, pp. 594-599, (2015).
   11. ASTM C150/C150M-11, Standard Specification for Portland cement, ASTM International, West Conshohohocken, PA, (2011).
   12. ASTM C29/C29M/17, Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate. ASTM International, West Conshohohocken, PA, (2011).
   13. ACI Committee 211. Standard Practice for Selecting Proportions for Structural Lightweight Concrete (ACI 211.2-91). American Concrete Institute, (1992).‏
   14. ASTM C39-11. Standard Specification for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohohocken, PA, (2011).
   15. ASTM C496/C496M-11. Standard Specification for Splitting Tensile Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohohocken, PA, (2011).
   16. http://bme.t.u-tokyo.ac.jp/researches/detail/concreteDB/index.html
   17. Minitab 17 Statistical Software [Computer software]. Incorporation, Minitab
   18. American Concrete Institute ACI Committee, "Building code requirements for structural concrete ACI 318-08 and commentary 318R-08 "Farmington Hills, MI, USA: American Concrete Institute, (2008).
   19. European Committee for Standardization. Eurocode No. 2, "Design of concrete structures. Part 1: General Rules and Rules for Buildings", (2005).
   20. Standards Australia, "Concrete structures", AS 3600, Sydney, Australia, (2009).
   21. Japan Society of Civil Engineers, "Standard Specification for Concrete Structure", Japanese Society of Civil Engineering No. 15, Tokyo, Japan, (2005).
   22. AASHTO T358-15, "Standard method of test for surface resistivity Indication of concretes Ability to resist chloride Ion penetration", AASHTO, (2006).
   23. AASHTO TP 64-03, "Standard Method of Test for predicting chloride penetration of hydraulic cement concrete by the rapid migration procedure".
   24. Nordtest, C., "Mortar and Cement-Based Repair Materials: Chloride Migration Coefficient from Non-steady-state Migration Experiments (NT BUILD 492)", Taastrupl, Denmark, (1999).‏