The Synthesis Of Manganese Oxides Through The Process Of Solution Combustion

مهندسی متالورژی و مواد

Article 7, Volume 33, Issue 2 - Serial Number 26, September 2022, Pages 93-110   

Document Type: Original Articles

DOI: 10.22067/jmme.2022.74924.1038

Authors

Mahsa Mohammadi Moqaddam¹; Mostafa Mirjalili^{* 1}; Jalil Vahdati Khaki²; sahar mollazadeh¹

¹Department of metallurgy, faculty of engineering, Ferdowsi University of Mashad

²Department of metallurgy, faculty of engineering, Ferdowsi University of Mashhad

Abstract

In recent years, manganese oxides (MnO2, Mn2O3, Mn3O4, MnO) have drawn the attention of many researchers due to their physicochemical properties and potential applications. Manganese dioxide, among manganese oxides, exists in several different polymorphs including α, β, γ, δ, λ-MnO2, which crystal structure determines many of its functional properties, including magnetic properties, electrochemical identification, molecular absorption, and properties. To date, various methods have been employed to synthesize these materials. This study proposes a method of solution combustion synthesis to synthesize manganese oxides in a single step. This study seeks to determine whether changes in fuel type, φ value, adiabatic temperature, and number of additives affect the stability of manganese oxide structure. The synthesized particles were then analyzed using X-ray diffraction and FE-SEM microstructural analysis. Studies have demonstrated that φ ˂ 1 and urea are the optimal conditions for the synthesis. Likewise, in order to determine the effects of heat treatment on the crystallinity of the synthesized particles in different conditions, heat treatment was carried out, which increased crystallinity in the samples. Despite the difficulty of synthesizing manganese oxides, particularly MnO2, the present study was able to perform it in a single step via solution combustion synthesis.

Keywords

Manganese Oxides; Solution combustion synthesis; urea; glycine; heat treatment

References

1. Gleiter, H. "Nanostructured Materials: Basic Concepts and Microstructure" Acta materialia. Vol. 48, pp. 1-29, (2000).
2. Hellmig RJ, Ferkel H. "Using Nanoscaled Powder as an Additive in Coarse-Grained Powder". Journal of American Ceramic Society. 84, No. 2, pp. 261-66 (2006).
3. Keane M.A. "Chemical and Bio-Ceramics for Catalysis" Journal of Materials Science. 38, pp. 4661 – 4675, (2003)
4. Peña, M. A., & Fierro, J. L. G. "Chemical structures and performance of perovskite oxides". Chemical Reviews. Vol. 101, No. 7, pp. 1981–2017, (2001).
5. Patil, S. & Dasari, H. P. "Effect of fuel and solvent on soot oxidation activity of ceria nanoparticles synthesized by solution combustion method". Materials Science for Energy Technologies. Vol. 2, pp. 485–489 (2019).
6. Lee, J. "Manganese oxides with hierarchical structures derived from coordination polymers and their enhanced catalytic activity at low temperature for selective catalytic reduction of NOx". Dalton Trans. Vol. 48, 16395–16401, (2019).
7. Zhu, S., Ho, S. H., Jin, C., Duan, X. & Wang, S. "Nanostructured manganese oxides: Natural/artificial   formation and their induced catalysis for wastewater remediation". Environmental Science: Nano. Vol. 7, pp. 368–396 (2020).
8. Muya, R. K., Achola, L., Njagi, E. C., Ombaka, O., & Suib, S. L. "Synthesis, Characterization and Applications of Ttansition Metal-Doped Manganese Oxide Catalysts". Journal of Life Science Informatics Publications. Vol. 5, No. 2, pp. 16-30, (2019).
9. Muraoka, Atou T. "Preparation of α-MnO2 with an Open Tunnel". J Solid State Chem. Vol. 144, pp. 136-142, (1999).
10. Poyraz, A. S., Huang, J., Pelliccione, C. J., Tong, X., Cheng, S., Wu, L., Zhu, Y., Marschilok, A. C., Takeuchi, K. J., & Takeuchi, E. S. ,"Synthesis of cryptomelane type α-MnO2 (K:XMn₈O₁₆) cathode materials with tunable K⁺ content: The role of tunnel cation concentration on electrochemistry". Journal of Materials Chemistry A, Vol. 5, No. 32, pp. 16914–16928, (2017).
11. Rosa, R., Veronesi, P. & Leonelli, C. "A review on combustion synthesis intensification by means of microwave energy". Chemical Engineering and Processing: Process Intensification. Vol. 71, pp. 2–18, (2013).
12. Mukasyan, A. S. & Dinka, P. "Novel approaches to solution-combustion synthesis of nanomaterials". International Journal of Self-Propagating High-Temperature Synthesis. Vol. 16, pp. 23–35, (2007).
13. Varma, A., Mukasyan, A. S., Deshpande, K. T., Pranda, P. & Erri, P. R. "Solution Combustion Synthesis of Nanoscale Materials". Reviews. Vol. 116, No. 23, pp. 14493−14586, (2016).
14. Lan, B., Zheng, X., Cheng, G., Han, J., Li, W., & Sun, M. "The art of balance: Engineering of structure defects and electrical conductivity of a -MnO 2 for oxygen reduction reaction". Electrochimica Acta, Vol. 283, pp. 459–466, (2018).
15. Tompsett, D. A. & Islam, M. S. "Electrochemistry of Hollandite α ‑ MnO₂: Li-Ion and Na-Ion Insertion and Li₂O Incorporation". Chemistry Of Materials, Vol. 25, No. 12, pp. 2515-2526, (2013).
16. Zaki, M. I., Hasan, M. A., Pasupulety, L. & Kumari, K. "Thermochemistry of manganese oxides in reactive gas atmospheres: Probing catalytic MnOx compositions in the atmosphere of CO+O2". Thermochimica Acta, Vol. 311, pp. 97–103 (1998).
17. Li, W. N., Yuan, J., Gomez-Mower, S., Sithambaram, S. & Suib, S. L. "Synthesis of single crystal manganese oxide octahedral molecular sieve (OMS) nanostructures with tunable tunnels and shapes". Journal of Physical Chemistry B, Vol. 110, No. 7, pp. 3066–3070 (2006).
18. Jacob, K. T., Kumar, A., Rajitha, G. & Waseda, Y. "Thermodynamic data for Mn₃O₄, Mn₂O₃ and MnO₂". High Temperature Materials and Processes, Vol. 30, pp. 459–472 (2011).
19. Pistoia, G. "Some Restatements on the Nature and Behavior of MnO2 for Li Batteries". Journal of The Electrochemical Society, 129, No. 9, pp. 1861–1865 (1982).