Investigation of New Friction Models in Two-Dimensional Manipulation of Gastric Cancer Tissue

علوم کاربردی و محاسباتی در مکانیک

Article 1, Volume 35, Issue 2 - Serial Number 32, July 2023, Pages 1-16   

Document Type: Original Article

DOI: 10.22067/jacsm.2022.79529.1146

Author

Moein Taheri^*

Associate Professor of Mechanical Engineering, Arak University, Arak, Iran

Abstract

Goals such as not harming healthy tissues and other organs when using medicine and identifying cancerous tissues as soon as possible have led to the entry of nanoscience into the field of medicine. In this regard, a research was conducted considering various tools and methods, and the most desirable of these methods was the nanomanipulation method based on the atomic force microscope due to its many applications in the study of cell tissues in different environments. Therefore, in this article, in order to find the optimal amount of force and critical time in nanomanipulation of cancer tissue, with the aim of exploring the surface and obtaining information about gastric cancer tissue with the least damage, 2D simulation of nanomanipulation has been carried out. The important factor investigated in this research is friction, which is one of the factors that resist movement and has a direct effect on force and critical time. Therefore, with the development of simple friction models, considering Carlson-Batista, Lemaitre-Carlson and FKT friction models, force-time diagrams have been drawn and critical force and time values have been calculated. The lowest value of the force was equal to 0.453 nN and the lowest value of the critical time was equal to 45 ms, which was obtained from the simulation with the FKT friction model. Also, by comparing these values with past researches, a decrease in force and critical time compared to the LuGre friction model has been seen.
 

Keywords

Gastric cancer tissue; friction model; nanomanipulation; critical force and time; atomic force microscopy

References

 

[1] J. Carlson and A. Batista, “Constitutive relation for the friction between lubricated surfaces”, Physical Review E, vol. 53, no. 4, pp. 4153-4165, (1996).

[2] A. Lemaître, “Rearrangements and dilatancy for sheared dense materials”, Physical Review Letters, vol. 89, no. 19, pp. 195503:1-4, (2002).

[3] S. Leporatti, D. Vergara, A. Zacheo, V. Vergaro, G. Maruccio, R. Cingolani and R. Rinaldi, “Cytomechanical and topological investigation of MCF-7 cells by scanning force microscopy”, Nanotechnology, vol. 20, no. 5, pp. 055103: 1-6, (2009).

[4] M. Taheri, “Application of atomic force microscopy in critical force and critical time extraction of 2D manipulation for gastric cancer tissue with different friction models”, Nanoscale, vol. 9, no. 1, pp. 136-145, (2022).

[5] M. Taheri, “Investigation of the effect of different friction models on experimental extraction of 3D nanomanipulation force and critical time of colon cancer tissue”, Amirkabir Journal of Mechanical Engineering, vol. 54, no. 4, pp.4, (2022).

[6] M.H. Korayem, H.B. Hezaveh and M. Taheri, “Experimental Determination of HT29 Cancerous Cell Surface Roughness by Atomic Force Microscopy to be Applied in Nanomanipulation”, Applied and Computational Sciences in Mechanics, vol. 28, no. 1, pp. 111-122, (2017).

[7] Y. Bu, , L. Li, C. Yang, R. Li, and J. Wang, “Measuring viscoelastic properties of living cells”, Acta Mechanica Solida Sinica, vol. 32, no. 5, pp. 599-610, (2019).

[8] C. Hou, D. Sun and L. Dong, “Nanomanipulation in Biomedical Applications”, Current Robotics Reports, vol. 2, no. 2, pp. 133-145, (2021).

[9] Z. Lu, Z. Wang, D. Li, W. Zhu, R. Wang, K. Qu and J. Yan, “Effect of astragalus polysaccharides on cancer cells studied by AFM”, 2021 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale, (3M-NANO), IEEE, pp. 51-54, (2021).

[10] M. Taheri and S.H. Bathaee, “Determination of the young modulus of gastric cancer tissue experimentally using atomic force microscopy”, Modares Mechanical Engineering, vol. 20, no. 12, pp. 2709-2720, (2020).

[11] M. Taheri and M. Mirzaluo, “Experimental Extraction of Young's Modulus of MCF-7 Breast Cancer Cell Using Spherical Contact Models”, Amirkabir Journal of Mechanical Engineering, vol. 53, no.12, pp. 5769-5784, (2022).

[12] C. Hao, S. Wang, S. Yuan, B. Wu, P. Yu, and J. Shi, “Extraction algorithm for longitudinal and transverse mechanical information of AFM”, Nanotechnology and Precision Engineering, vol. 5, no. 2, pp. 023004, (2022).

[13] M.H. Korayem, H. Khaksar, and H. Sharahi, , “Modeling and simulation of contact parameters of elliptical and cubic nanoparticles to be used in nanomanipulation based on atomic force microscope’, Ultramicroscopy, vol. 206, pp. 112808: 1-12, (2019).

[14] A. D’orlando, J.Y. Mevellec, G. Louarn and B. Humbert, “Atomic force microscopy nanomanipulation by confocal Raman multiwavelength spectroscopy: Application at the monitoring of resonance profile excitation changes of manipulated carbon nanotube”, The Journal of Physical Chemistry C, vol. 124, no. 4, pp. 2705-2711, (2020).

[15] M. Makulavicius, O. Balitskyi, R. Urbonas, A. Dzedzickis, V. Bučinskas, A. Petronis, M. Kovalenko and I. Morkvenaite-Vilkonciene, “Recent Advances in Mechanical Micro-and Nanomanipulation”, Conference on Automation, Springer, pp. 248-256, (2020).

[16] T. Zhang, H. Yu, P. Li, X. Wang, F. Wang, J. Shi, Z. Liu, P. Yu, W. Yang and Y. Wang, “Microsphere-based super-resolution imaging for visualized Nanomanipulation”, ACS Applied Materials & Interfaces, vol. 12, no. 42, pp. 48093-48100, (2020).

[17] H. Khaksar, “Finding the optimal contact function and path in nanomanipulation process-based on AFM Nanorobot”, 2019 7th International Conference on Robotics and Mechatronics (ICRoM), IEEE, pp. 588-592, (2019).

[18] M. Taheri, “Investigation and sensitivity analysis of dimensional parameters and velocity in the 3D nanomanipulation dynamics of carbon nanotubes using statistical Sobol method”, Modares Mechanical Engineering, vol. 19, no. 1, pp. 125-135, (2019).

[19] M. Taheri, P. Karimi, M. Mstali, and M. Nazemizadeh, “Calculating the Young's modulus of head and neck cancer cells during the nanomanipulation process using atomic force microscope”, The Iranian Journal of Mechanical Engineering, vol. 31, no. 4, pp. 22-31, (2022).

[20] M. Khalili, M. Taheri, S.H. Bathaee and F. Shakeri, “Study of DNA nanoparticle manipulation using atomic force microscopy based on finite element method using theories of contact mechanics”; Mechanic of Advanced and Smart Materials, vol. 1, no. 2, pp. 155-174, (2022).

[21] F. Fereiduni, M. Taheri and M. Modabberifar, “Investigation of the effect of different parameters on force in the second phase of two-dimensional Nanomanipulation”, Iranian Journal of Manufacturing Engineering, vol. 8, no. 2, pp. 23-31, (2021).

[22] A. Moshirpanahi, Sh. Etemadi Haghighi, and A. Imam, “Dynamic modeling of a cylindrical nanoparticle manipulation by AFM”, Engineering Science and Technology, vol. 24, no. 3, pp. 611-619, (2021).

[23] M. Modabberifar, Y. Hojjat, A. Abdullah and M. Dadkhah, “Analysis of the Dynamic Characteristics of a Three Phase Panel Type Electrostatic Actuator Using PEM System Identification”, Sensors & Actuators A: Physical, vol. 151, no. 2, pp. 173–178, (2009).

[24] M.H. Korayem, H.B. Hezaveh, and M. Taheri, “Dynamic modeling and simulation of rough cylindrical micro/nanoparticle manipulation with atomic force microscopy”, Microscopy and Microanalysis, vol. 20, no. 6, pp. 1692-1707, (2014). ‏

[25] M.H. Korayem, M. Taheri and A.H. Korayem, “Manipulation with atomic force microscopy: DNA and yeast micro/nanoparticles in biological environments”, Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-body Dynamics, vol. 228, no. 4, pp. 414-425, (2014).‏

[26] M.H. Korayem, H. Khaksar, R.N. Hefz Abad and M. Taheri, “Simulation of soft bacteria contact to be applied in nanomanipulation”, Modares Mechanical Engineering, vol. 14, no. 14, pp. 227-234, (2015).