Soft Modeling of Engineering Changes in System dynamics (Case Study : Automobile Industry)

Journal of Systems Thinking in Practice

دوره 2، شماره 1 - شماره پیاپی 4، خرداد 2023، صفحه 71-92   

نوع مقاله: Research Article

شناسه دیجیتال (DOI): 10.22067/jstinp.2023.81154.1031

نویسنده

Rashid Faridnia^*

Department of Industrial Mangement, Faculty of Economics, Management and Administrative Sciences,Semnan University, Semnan, iran.

چکیده

Effective management of engineering changes in the Automotive industry is an essential ability in new product development, and products evolve in an environment with an iterative nature and increasing changes from the idea stage to the final product and shortening the life cycle of products and also the duration of product Launch from The idea-to-market stage is a severe requirement of a competitive environment.
First, the complexity of the product development environment, the challenges of engineering changes and the need to control and governance its effects in a competitive environment in the vehicle development process are described. Then by literature review, an approach to modeling engineering change management using two hard and soft models has been introduced.in our modeling approach, the assumptions of cybernetics and system dynamics approaches have been practiced in building causal loop diagrams that integrated SOFT effects with HARD dimension parameters. Using this approach to develop simulation scenarios, strategic managers have better insight into effective management of engineering changes to find appropriate policies configuration to control its effects in a competitive environment.

کلیدواژه‌ها

Product life cycle؛ New product development system؛ Complexity؛ Engineering change management, Hard and soft modeling

مراجع

Ansari, R., 2019. Dynamic simulation model for project change-management policies: engineering project case. Journal of Construction Engineering and Management, 145(7), p.05019008. https://doi.org/10.1061/(ASCE)CO.1943-7862.0001664.

Becerril, L., Sauer, M. and Lindemann, U., 2016. Estimating the effects of Engineering Changes in early stage product development. In Proceedings of the 18th International DSM Conference.

Bock, C. and Feeney, A.B., 2013. Engineering change management concepts for systems modeling. US Department of Commerce, National Institute of Standards and Technology. https://doi.org/10.6028/NIST.IR.7922.

Braaksma, A.J.J., Klingenberg, W. and Veldman, J., 2013. Failure mode and effect analysis in asset maintenance: a multiple case study in the process industry. International journal of production research, 51(4), pp.1055-1071. https://doi.org/10.1080/00207543.2012.674648.

Chen, C.S., Tsui, Y.K., Dzeng, R.J. and Wang, W.C., 2015. Application of project-based change management in construction: a case study. Journal of Civil Engineering and Management, 21(1), pp.107-118. https://doi.org/10.3846/13923730.2013.802712.

Cooper, R.G., 1976. Introducing successful new industrial products. European Journal of Marketing, 10(6), pp.301-329. https://doi.org/10.1108/EUM0000000005053.

Das, S. and Kanchanapiboon, A., 2011. A multi-criteria model for evaluating design for manufacturability. International Journal of Production Research, 49(4), pp.1197-1217. https://doi.org/10.1080/00207540903505267.

Dieter, G.E., 2000. Engineering design: A materials and processing approach. McGraw. Hill Publishers. New York.

Do, N., 2015. Integration of engineering change objects in product data management databases to support engineering change analysis. Computers in Industry, 73, pp.69-81. https://doi.org/10.1016/j.compind.2015.08.002.

Eckert, C.M., De Weck, O., Keller, R. and Clarkson, P.J., 2009. Engineering change: drivers, sources and approaches in industry.

Eger, T., Eckert, C. and Clarkson, P.J., 2005. The role of design freeze in product development. In DS 35: Proceedings ICED 05, the 15th International Conference on Engineering Design, Melbourne, Australia, 15.-18.08. 2005.

Fei, G., Gao, J., Owodunni, D. and Tang, X., 2011. A model-driven and knowledge-based methodology for engineering design change management. Computer-Aided Design and Applications, 8(3), pp.373-382. https://doi.org/10.3722/cadaps.2011.373-382.

Fei, G., Gao, J., Owodunni, O. and Tang, X., 2011b. A method for engineering design change analysis using system modelling and knowledge management techniques. International Journal of Computer Integrated Manufacturing, 24(6), pp.535-551. https://doi.org/10.1080/0951192X.2011.562544.

Francom, T.C. and El Asmar, M., 2015. Project quality and change performance differences associated with the use of building information modeling in design and construction projects: Univariate and multivariate analyses. Journal of construction engineering and management, 141(9), p.04015028. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000992.

Fricke, E. and Schulz, A.P., 2005. Design for changeability (DfC): Principles to enable changes in systems throughout their entire lifecycle. Systems Engineering, 8(4), pp. 342-359.  https://doi.org/10.1002/sys.20039.

Giffin, M.L., 2007. Change propagation in large technical systems (Doctoral dissertation, Massachusetts Institute of Technology).

Gosling, J., Naim, M. and Towill, D., 2013. A supply chain flexibility framework for engineer-to-order systems. Production Planning & Control, 24(7), pp.552-566. https://doi.org/10.1080/09537287.2012.659843.

 Grzegorzewski, P., Kochanski, A. and Kacprzyk, J. eds., 2019. Soft Modeling in Industrial Manufacturing. Berlin: Springer.

Hamraz, B., Caldwell, N.H., Ridgman, T.W. and Clarkson, P.J., 2015. FBS Linkage ontology and technique to support engineering change management. Research in engineering design, 26, pp.3-35. https://doi.org/10.1007/s00163-014-0181-9.

Hartman, N.W., and Kenley,.C.R.,  2015. Product lifecycle management: The salvation of systems engineering. 11th SA INCOSE Conference Pretoria, 16-18.

Huang, G.Q. and Mak, K.L., 1999. Current practices of engineering change management in UK manufacturing industries. International Journal of Operations & Production Management. https://doi.org/10.1108/01443579910244205.

Jarratt, T., Clarkson, J. and Eckert, C., 2005. Engineering change. Design process improvement: a review of current practice, pp.262-285. https://doi.org/10.1007/978-1-84628-061-0_11.

Jarratt, T.A.W., Eckert, C.M., Caldwell, N.H. and Clarkson, P.J., 2011. Engineering change: an overview and perspective on the literature. Research in engineering design, 22, pp.103-124. https://doi.org/10.1007/s00163-010-0097-y.

Li, W., 2012. Using Discrete Event Simulation for Evaluating Engineering Change Management Decisions. In Discrete Event Simulations-Development and Applications. IntechOpen.

Love, P.E., Holt, G.D., Shen, L.Y., Li, H. and Irani, Z., 2002. Using systems dynamics to better understand change and rework in construction project management systems. International journal of project management, 20(6), pp.425-436. https://doi.org/10.1016/S0263-7863(01)00039-4.

Matthews, J., Love, P.E., Mewburn, J., Stobaus, C. and Ramanayaka, C., 2018. Building information modelling in construction: insights from collaboration and change management perspectives. Production planning & control, 29(3), pp.202-216. https://doi.org/10.1080/09537287.2017.1407005.

Mehr, M.R., Rashed, S.A.M., Lueder, A. and Mißler-Behr, M., 2021. An Approach to Capture, Evaluate and Handle Complexity of Engineering Change Occurrences in New Product Development. International Journal of Industrial and Manufacturing Engineering, 15(9), pp.400-408.

Morris, A., Halpern, M., Setchi, R. and Prickett, P., 2016. Assessing the challenges of managing product design change through-life. Journal of Engineering Design, 27(1-3), pp.25-49. ttps://doi.org/10.1080/09544828.2015.1085498.

Mutingi, M., Mbohwa, C. and Mapfaira, H., 2015, March. An alternative framework for managing engineering change. In 2015 International Conference on Industrial Engineering and Operations Management (IEOM) (pp. 1-5). IEEE.

Reddi, K.R. and Moon, Y.B., 2013. Modelling engineering change management in a new product development supply chain. International journal of production research, 51(17), pp.5271-5291. ttps://doi.org/10.1080/00207543.2013.807954.

Reddi, K.R., 2011. A conceptual framework and simulation modeling of engineering change management in a collaborative environment. Syracuse University.

Rodrigues, L.L., Dharmaraj, N. and Shrinivasa Rao, B.R., 2006. System dynamics approach for change management in new product development. Management Research News, 29(8), pp.512-523. https://doi.org/10.1108/01409170610692824.

Ross, A.M., Rhodes, D.H. and Hastings, D.E., 2008. Defining changeability: Reconciling flexibility, adaptability, scalability, modifiability, and robustness for maintaining system lifecycle value. Systems engineering, 11(3), pp.246-262. https://doi.org/10.1002/sys.20098.

Rouibah, K. and Caskey, K.R., 2003. Change management in concurrent engineering from a parameter perspective. Computers in industry, 50(1), pp.15-34. https://doi.org/10.1016/S0166-3615(02)00138-0.

Saoud, L.A., Omran, J., Hassan, B., Vilutienė, T. and Kiaulakis, A., 2017. A method to predict change propagation within building information model. Journal of Civil Engineering and Management, 23(6), pp.836-846. https://doi.org/10.3846/13923730.2017.1323006.

Schuh, G., Prote, J.P., Luckert, M., Basse, F., Thomson, V. and Mazurek, W., 2018. Adaptive design of engineering change management in highly iterative product development. Procedia CIRP, 70, pp.72-77. https://doi.org/10.1016/j.procir.2018.02.016.

Shakirov, E.F., Kattner, N., Fortin, C., Uzhinsky, I.K. and Lindemann, U., 2021. Reducing the uncertainty in engineering change management using historical data and simulation modelling: a process twin concept. International Journal of Product Lifecycle Management, 13(1), pp.89-114. https://doi.org/10.1504/IJPLM.2021.115704.

Sivanathan, A., Ritchie, J.M. and Lim, T., 2017. A novel design engineering review system with searchable content: knowledge engineering via real-time multimodal recording. Journal of Engineering Design, 28(10-12), pp.681-708. https://doi.org/10.1080/09544828.2017.1393655.

Sjögren, P., Fagerström, B., Kurdve, M. and Callavik, M., 2018. Managing emergent changes: ad hoc teams’ praxis and practices. International Journal of Managing Projects in Business, 11(4), pp.1086-1104. https://doi.org/10.1108/IJMPB-12-2017-0163.

Stevens, C.A. and Wright, K., 1991. Managing change with configuration management. National Productivity Review, 10(4), pp.509-518. https://doi.org/10.1002/npr.4040100408.

Tavcar, J. and Duhovnik, J., 2006. Engineering Change Management in Distruted Environment with PDM/PLM Support. In Manufacturing the Future. IntechOpen.

Wasmer, A., G. Staub, and R. W. Vroom. 2011. "An industry approach to shared, crossorganisational engineering change handling-The road towards standards for
product data processing." Computer-Aided Design 43 (5):533-45. https://doi.org/10.1016/j.cad.2010.10.002.

 

Whyte, J., Stasis, A. and Lindkvist, C., 2016. Managing change in the delivery of complex projects: Configuration management, asset information and ‘big data’. International journal of project management, 34(2), pp.339-351. https://doi.org/10.1016/j.ijproman.2015.02.006.

Wickel, M., Chucholowski, N., Behncke, F. and Lindemann, U., 2015. Comparison of seven company-specific engineering change processes. In Modelling and Management of Engineering Processes: Proceedings of the 3rd International Conference 2013 (pp. 125-136). Springer Berlin Heidelberg.

Wu, W.H., Fang, L.C., Wang, W.Y., Yu, M.C. and Kao, H.Y., 2014. An advanced CMII-based engineering change management framework: the integration of PLM and ERP perspectives. International Journal of Production Research, 52(20), pp.6092-6109. https://doi.org/10.1080/00207543.2014.911987.

Zhao, Z.Y., Lv, Q.L., Zuo, J. and Zillante, G., 2010. Prediction system for change management in construction project. Journal of Construction Engineering and Management, 136(6), pp.659-669. https://doi.org/10.1061/(ASCE)CO.1943-7862.0000168.