A Novel Approach for Planning Imperfect Preventive Maintenance in Manufacturing Systems by a Simulation-Optimization Approach

Journal of Systems Thinking in Practice

مقاله 1، دوره 2، شماره 3 - شماره پیاپی 6، دی 2023، صفحه 1-20   

نوع مقاله: Research Article

شناسه دیجیتال (DOI): 10.22067/jstinp.2023.84099.1072

نویسندگان

Taha-hossein Hejazi^{* 1}؛ Bahareh Hekmatnia²؛ Mehrad Soltanzadeh³

¹Department of Industrial Engineering, Amirkabir University of Technology, Garmsar Campus, Iran.

²Department of Industrial Engineering and Management, Sadjad University of Technology, Mashhad, Iran.

³Department of Management, Kheradgarayan Motahhar Institute of Higher Education, Mashad, Iran.

چکیده

This study addresses simulating manufacturing processes and maintenance activities in a multi-product industry to model the complexity of interactions between maintenance strategies and their effects on a manufacturing system. A novel simulation model has been developed using Discrete Event Simulation (DES) to investigate interactions between manufacturing and maintenance systems. A real two-product manufacturing line in an automotive factory was studied to demonstrate the proposed model's efficacy. Two significant challenges were considering Preventative Maintenance (PM) as imperfect PM activities and estimating unknown probability distribution in a real industry. These are new assumptions that generally have not been considered in the prior studies. To overcome these problems, imperfect maintenance activities are defined as different scenarios and unknown probability distributions are estimated based on historical records in the case study. A simulation-based optimization method was developed using OptQuest, and the results of the proposed method were then compared with the current values in the case study. The findings illustrate that the proposed model can reduce the system's manufacturing and maintenance costs by 13%. In addition, the implementation of maintenance planning in this research improved some factors in the manufacturing system efficiently.

کلیدواژه‌ها

Preventive maintenance؛ Simulation-Optimization؛ Imperfect maintenance؛ Maintenance cost؛ OptQuest

مراجع

Aghezzaf, E.-H., Khatab, A. and Le Tam, P. 2016. Optimizing production and imperfect preventive maintenance planning׳ s integration in failure-prone manufacturing systems. Reliability Engineering & System Safety, 145, pp.190-198. https://doi.org/10.1016/j.ress.2015.09.017.

Alrabghi, A. and Tiwari, A. 2016. A novel approach for modelling complex maintenance systems using discrete event simulation. Reliability Engineering & System Safety, 154, pp.160-170. https://doi.org/10.1016/j.ress.2016.06.003.

Alrabghi, A., Tiwari, A. and Savill, M. 2017. Simulation-based optimisation of maintenance systems: Industrial case studies. Journal of Manufacturing Systems, 44, pp. 191-206. https://doi.org/10.1016/j.jmsy.2017.05.008.

Babishin, V. and Taghipour, S. 2016. Optimal maintenance policy for multicomponent systems with periodic and opportunistic inspections and preventive replacements. Applied Mathematical Modelling, 40, pp.10480-10505. https://doi.org/10.1016/j.apm.2016.07.019.

Besnard, F. and Bertling, L. 2010. An approach for condition-based maintenance optimization applied to wind turbine blades. IEEE Transactions on Sustainable Energy, 1, pp.77-83. https://doi.org/10.1109/TSTE.2010.2049452.

Bisht, V. and Singh, S. B. 2023. Lz‐transform approach to evaluate reliability indices of multi‐state repairable weighted K‐out‐of‐n systems. Quality and Reliability Engineering International, 39, 1043-1057. https://doi.org/10.1002/qre.3279.

Chen, N., YE, Z.-S., Xiang, Y. and Zhang, L. 2015. Condition-based maintenance using the inverse Gaussian degradation model. European Journal of Operational Research, 243, pp.190-199. https://doi.org/10.1016/j.ejor.2014.11.029.

Coit, D. W., Chatwattanasiri, N., Wattanapongsakorn, N. and Konak, A. 2015. Dynamic k-out-of-n system reliability with component partnership. Reliability Engineering & System Safety, 138, pp.82-92. https://doi.org/10.1016/j.ress.2015.01.004.

De Almeida, A. T. 2012. Multicriteria model for selection of preventive maintenance intervals. Quality and Reliability Engineering International, 28, pp.585-593. https://doi.org/10.1002/qre.1415.

Driessen, J., Peng, H. and Van Houtum, G. 2017. Maintenance optimization under non-constant probabilities of imperfect inspections. Reliability Engineering & System Safety, 165, pp.115-123. https://doi.org/10.1016/j.ress.2017.03.020.

Glover, F., Kelly, J. P. and Laguna, M. 1999. New advances for wedding optimization and simulation.  Proceedings of the 31st conference on Winter simulation: Simulation---a bridge to the future, 1, pp.255-260.

Golbasi, O. and Turan, M. O. 2020. A discrete-event simulation algorithm for the optimization of multi-scenario maintenance policies. Computers & Industrial Engineering, 145, p.106514. https://doi.org/10.1016/j.cie.2020.106514.

Hajipour, Y. and Taghipour, S. 2016. Non-periodic inspection optimization of multi-component and k-out-of-m systems. Reliability Engineering & System Safety, 156, pp.228-243. https://doi.org/10.1016/j.ress.2016.08.008.

Jun, Z., Wei-Liang, J. and Jiang-Hong, M. 2017. Experimental study on steel bars' fatigue damage based on piezomagnetism. Journal of ZheJiang University (Engineering Science), 51, pp.1681-1687. https://doi.org/10.3785/j.issn.1008-973X.2017.02.001.

Kelton, W., Sadowski, R. and SWETS, N. 2009. Simulation with Arena, McGraw-Hill Science/Engineering/Math.

Lam, J. Y. J. and Banjevic, D. 2015. A myopic policy for optimal inspection scheduling for condition based maintenance. Reliability Engineering & System Safety, 144, pp.1-11. https://doi.org/10.1016/j.ress.2015.06.009.

Liang, Z. and Parlikad, A. K. 2020. Predictive group maintenance for multi-system multi-component networks. Reliability Engineering & System Safety, and, p.106704. https://doi.org/10.1016/j.ress.2019.106704.

Lim, J., QU, J. and Zuo, M. J. 2016. Age replacement policy based on imperfect repair with random probability. Reliability Engineering & System Safety, 149, pp.24-33. https://doi.org/10.1016/j.ress.2015.10.020.

Liu, B., Xie, M., Xu, Z. and Kuo, W. 2016. An imperfect maintenance policy for mission-oriented systems subject to degradation and external shocks. Computers & Industrial Engineering, 102, pp.21-32. https://doi.org/10.1016/j.cie.2016.10.008.

Liu, Q., Dong, M. and Chen, F. 2018. Single-machine-based joint optimization of predictive maintenance planning and production scheduling. Robotics and Computer-Integrated Manufacturing, 51, pp.238-247. https://doi.org/10.1016/j.rcim.2018.01.002.

Madu, C. N. 2000. Competing through maintenance strategies. International Journal of Quality & Reliability Management, 17, pp.937-949. https://doi.org/10.1108/02656710010378752.

Martón, I., Martorell, P., Mullor, R., SÁNCHEZ, A. I. and Martorell, S. 2016. Optimization of test and maintenance of ageing components consisting of multiple items and addressing effectiveness. Reliability Engineering & System Safety, 153, pp.151-158. https://doi.org/10.1016/j.ress.2016.04.015.

Nakagawa, T. and Zhao, X. 2015. Maintenance overtime policies in reliability theory: models with random working cycles, Springer.

Nguyen, H. S. H., Do, P., Vu, H.-C. and Iung, B. 2019. Dynamic maintenance grouping and routing for geographically dispersed production systems. Reliability Engineering & System Safety, 185, pp.392-404. https://doi.org/10.1016/j.ress.2018.12.031.

Nyemba, W. R. and Mbohwa, C. 2017. Modelling, simulation and optimization of the materials flow of a multi-product assembling plant. Procedia Manufacturing, 8, pp.59-66. https://doi.org/10.1016/j.promfg.2017.02.007.

Poppe, J., Basten, R. J., Boute, R. N. and Lambrecht, M. R. 2017a. Numerical study of inventory management under various maintenance policies. Reliability Engineering & System Safety, 168, pp.262-273. https://doi.org/10.1016/j.ress.2017.06.012.

Poppe, J., Basten, R. J. I., Boute, R. N. and Lambrecht, M. R. 2017b. Numerical study of inventory management under various maintenance policies. Reliability Engineering & System Safety, 168, pp.262-273. https://doi.org/10.1016/j.ress.2017.06.012.

Roux, O., Duvivier, D., Quesnel, G. and Ramat, E. 2013. Optimization of preventive maintenance through a combined maintenance-production simulation model. International journal of production economics, 143, pp.3-12. https://doi.org/10.1016/j.ijpe.2010.11.004.

Sharifi, M. and Taghipour, S. 2023. Inspection Interval Optimization of a Weighted-K-out-of-N System with Identical Multi-State Load-Sharing Components. Reliability Engineering & System Safety, p.109412. https://doi.org/10.1016/j.ress.2023.109412.

Sharma, P., Kulkarni, M. S. and Yadav, V. 2017. A simulation based optimization approach for spare parts forecasting and selective maintenance. Reliability Engineering & System Safety, 168, pp.274-289. https://doi.org/10.1016/j.ress.2017.05.013.

Wakiru, J. M., Pintelon, L., Muchiri, P. N. and Chemweno, P. K. 2019. A simulation-based optimization approach evaluating maintenance and spare parts demand interaction effects. International journal of production economics, 208, pp.329-342. https://doi.org/10.1016/j.ijpe.2018.12.014.

Wang, G. J. and Zhang, Y. L. 2013. Optimal repair–replacement policies for a system with two types of failures. European Journal of Operational Research, 226, pp.500-506. https://doi.org/10.1016/j.ejor.2012.11.053.

Wu, T., Yang, L., MA, X., ZHANG, Z. and ZHAO, Y. 2020. Dynamic maintenance strategy with iteratively updated group information. Reliability Engineering & System Safety, 197, p.106820. https://doi.org/10.1016/j.ress.2020.106820.

Zhu, S., Van Jaarsveld, W. and Dekker, R. 2020. Spare parts inventory control based on maintenance planning. Reliability Engineering & System Safety, 193, p.106600. https://doi.org/10.1016/j.ress.2019.106600.