[1] E. Touceda, “Pertinent Facts Concerning Malleable-Iron Castings”, SAE Trans., pp. 632–660, 1922..
[2] I. Rajkumar, N. Rajini, A. Nair, K. A. Prasath, M. Ramaganesh, and G. R. Kharrthikeyan, “Optimization of multi gating system for the experimental investigation inflow parameters with effects of design in small scale industries”, Materials Today: Proceeding, vol. 59, pp. 769–774, 2022. https://doi.org/10.1016/j.matpr.2021.12.578
[3] K. H. Renukananda and B. Ravi, “Multi-gate systems in casting process: comparative study of liquid metal and water flow”, Materials and Manufacturing Processes, vol. 31, no. 8, pp. 1091–1101, 2016. https://doi.org/10.1080/10426914.2015.1037911
[4] P. K. Seo, D. U. Kim, and C. G. Kang, “The effect of the gate shape on the microstructural characteristic of the grain size of Al–Si alloy in the semi-solid die casting process”, Mater. Sci. Eng. A, vol. 445-446, pp. 20–30, 2007. https://doi.org/10.1016/j.msea.2006.06.133
[5] M. Thieman, R. Kamm, and J. Jorstad, “Copper motor rotors: Energy saving efficiency, now also economic feasibility”, Electrical Insulation Conference and Electrical Manufacturing Expo, pp. 328–333, 2007. https://doio.org/10.1109/EEIC.2007.4562637
[6] C. H. Kim and T. H. Kwon, “A runner–gate design system for die casting”, Taylor & Francis online, vol. 16, no. 6, pp. 789-801 2006. https://doi.org/10.1081/AMP-100108699
[7] N. N. Xu, Z. Y. Zhang, H. G. Zhang, T. Lv, Y. Y. Liu, and Q. X. Hu, “The Optimization of Vacuum Casting Filling Velocity Based on Numerical Simulation”, Key Eng. Mater, vol. 522, pp. 221–226, 2012. https://doi.org/10.4028/www.scientific.net/KEM.522.221
[8] A. B. Rice, “Numerical simulation of mold filling processes”, Purdue University, 1993.
[9] I. Rajkumar, N. Rajini, T. R. Prabhu, S. O. Ismail, S. Siengchin, F. Mohammad, and H. A. Al-Lohedan, “Applicability of angular orientations of gating designs to quality of sand casting components using two-cavity mould set-up”, Transactions of the Indian Institute of Metals, vol. 75, pp. 513-524, 2021. https://doi.org/10.1007/s12666-021-02434-z
[10] M. M. Zor, A. Yoloğlu, S. Kesim, and F. Tülüce, “Pressurized gating system design and optimization in steel castings”, Eng. Applied, vol. 1, no. 1, 2022.
[11] M. M. Zor, F. Tülüce, S. Kesim, and A. Yoloğlu, “The effect of molding and gating system design on hydrogen induced crack defects in steel castings”, Adv. Eng. Sci., vol. 3, pp. 164–177, 2023.
[12] J.-K. Kuo, P.-H. Huang, H.-Y. Lai, and W.-J. Wu, “Design of casting systems for stainless steel exhaust manifold based on defective prediction model and experimental verification”, International Journal of Advanced Manufacturing Technologo, vol. 100, pp. 529–540, 2019. https://doi.org/10.1007/s00170-018-2737-8
[13] J. Jezierski, R. Dojka, and K. Janerka, “Optimizing the gating system for steel castings”, Metals, vol. 8, no. 4, pp. 266, 2018. https://doi.org/10.3390/met8040266
[14] H. Alrobei, R. A. Malik, F. Amjad, and I. AlBaijan, “Investigation of Structure and Mechanical Characteristics of a High Manganese Steel via SolidCast Simulation Method”, Metals, vol. 13, no. 3, pp. 572, 2023. https://doi.org/10.3390/met13030572
[15] A. Modaresi, A. Safikhani, A. M. S. Noohi, N. Hamidnezhad, and S. M. Maki, “Gating system design and simulation of gray iron casting to eliminate oxide layers caused by turbulence”, International Journal of Metalcasting, vol. 11, pp. 328–339, 2017. https://doi.org/10.1007/s40962-016-0061-3
[16] R. Dojka, J. Jezierski, and M. Szucki, “The importance of the geometry of the down sprue in the gravity casting process”, Materials, vol. 15, no. 14, pp. 4937, 2022. https://doi.org/10.3390/ma15144937
[17] O. A. Adefuye, O. Ji, L. Oi, and O. Fadipe, “Gating system design solutions for casting defects from pouring”, Eng. Technol. Res. J., Vol. 5, No. 1, pp. 26–31, 2020. https://doi.org/10.47545/etrj.2020.5.1.057
[18] R. Dojka, J. Jezierski, and J. Campbell, “Optimized gating system for steel castings”, Journal of Materials Engineering and Performance, vol. 27, pp. 5152–5163, 2018. https://doi.org/10.1007/s11665-018-3497-1
[19] J. K. Kuo, P. H. Huang, H. Y. Lai, and J. R. Chen, “Optimal gating system design for investment casting of 17-4PH stainless steel enclosed impeller by numerical simulation and experimental verification”, International Journal of Advanced Manufacturing Technology, vol. 92, pp. 1093–1103, 2017. https://doi.org/10.1007/s00170-017-0198-0
[20] S. Santhi, B. R. Surya, S. Jairam, J. Jhansi, and P. K. S. Subramanian, “Design of gating and riser system for grate bar casting”, Indian Foundry J., vol. 61, no. 1, 2015.
[21] M. Iqbal, “Gating design criteria for sound casting”, International Journal of Mechanical Engineering and Robotics Research, vol. 3, no. 3, pp. 675, 2014. https://doi.org/: 10.18178/ijmerr
[22] M. B. N. Shaikh, S. Ahmad, A. Khan, and M. Ali, “Optimization of multi-gate systems in casting process: Experimental and simulation studies”, in IOP Conference Series: Materials Science and Engineering, 2018. https://doi.org/10.1088/1757-899X/404/1/012040
[23] T. R. Vijayaram, S. Sulaiman, A. M. S. Hamouda, and M. H. M. Ahmad, “Numerical simulation of casting solidification in permanent metallic molds”, Journal of Materials Processing Technology, vol. 178, no. 1-3, pp. 29–33, 2006. https://doi.org/10.1016/j.jmatprotec.2005.09.025
[24] W. Li and J. Cui, “A new method for quickly locating the hot spots in solidification simulation of complicated castings”, International Journal Cast Metals Research, vol. 15, no. 4, pp. 319-323, 2016. https://doi.org/10.1080/13640461.2003.11819505
[25] X. Qi, L. Liu, T. Riberi-Béridot, N. Mangelinck-Noel, and W. Miller, “Simulation of grain evolution in solidification of silicon on meso-scopic scale”, Computational Materials Science, vol. 159, pp. 432- 439, 2019. https://doi.org/10.1016/j.commatsci.2018.12.015
[26] L. Chen et al., “Numerical simulation and optimization of indirect squeeze casting process”, Engineering Science, vol. 13, no. 2, pp. 65–70, 2020.
[27] M. Bruna and M. Galčík, “Effect of Filter Type on Mechanical Properties During Aluminium Alloy Casting”, Arch. Foundry Eng., vol. 22, no. 3, 2022. http://doi.org/10.24425/afe.2022.140241
[28] M. Abdollahi, A. Aliadeh, S. poloee, M Zahmatkesh, “Investigation on Microstructure and Mechanical Behavior of Carbon and Glass Reinforced Aluminum CompositePipes”, Journal Metallurgical Materials Engineering, Vol. 34, No. 1, pp. 31–46, 2023.
[29] M. Alipour, “Investigation of the microstructure and mechanical properties of cast Al-8Zn-3Mg-2.5Cu nanocomposite reinforced with SiC nanoparticles after age hardening heat treatment”, Journal of Metallurgical and Materials Engineering, vol. 34, no. 1, pp. 1–14, 2023. https://doi.org/10.22067/jmme.2022.79507.1084
