[1] F. S. Hardianto, K. M. Truong, "Seismic deformation of back-to-back mechanically stabilized earth (MSE) walls", Earth Retention Conference 3, (2010), pp. 704-711, (2010). https://doi.org/10.1061/41128(384)70
[2] M. Djabri, S. Benmebarek, "FEM analysis of back-to-back geosynthetic-reinforced soil retaining walls", International Journal of Geosynthetics and Ground Engineering, Vol. 2, pp. 1-8, (2016).
[3] M. Yazdandoust, A. A. Samee and A. Ghalandarzadeh, "Assessment of seismic behavior of back-to-back mechanically stabilized earth walls using 1g shaking table tests", Soil Dynamics and Earthquake Engineering, Vol. 155, P. 106078, (2022). https://doi.org/10.1016/j.soildyn.2020.106078
[4] M. Soltani Mohammadi, S. Rahimi, "Probability distribution of relative displacement of two adjacent single degree of freedom systems", Modares Civil Engineering journal, Vol. 14, No. 5, pp. 49-63, (2014).
[5] A. H. Gorji, E. Darvishan and H. Babajanian Bisheh, "A Study on the Effect of Aleatory and Epistemic Uncertainties on Fragility Curves of Steel Moment Frames", Ferdowsi Civil Engineering, Vol. 33, No. 31, pp. 1-15, (2020). Doi: 10.22067/civil.v33i3.85472
[6] M. Maddahi, m. gerami and H. Naderpour, "Seismic Performance of Rehabilitated Moment Frame with Steel Shear Wall by Considering Structural Uncertainties", Ferdowsi Civil Engineering, Vol. 32, No. 28, pp. 87-104, (2019). Doi: 10.22067/.v32i4.78335
[7] H. Tajmir Riahi and S. M. Ommizadeh, "Study of the Seismic Vulnerability of Steel Moment-Resisting Frames Designed Based on the Tenth Code of the Iranian National Building Regulations Using Fragility Curves", Ferdowsi Civil Engineering, Vol. 28, No. 1, Pp. 13-28, (2016) (In Persian). Doi: 10.22067/civil.v28i1.15811
[8] Y. Maruyama, F. Yamazaki, K. Mizuno, Y. Tsuchiya and H. Yogai, "Fragility curves for expressway embankments based on damage datasets after recent earthquakes in Japan", Soil Dynamics and Earthquake Engineering, Vol. 30, No. 11, pp. 1158-1167, (2010).https://doi.org/10.1016/j.soildyn.2010.04.024
[9] S. Argyroudis, A. M. Kaynia and K. Pitilakis, "Development of fragility functions for geotechnical constructions: application to cantilever retaining walls",Soil dynamics and earthquake engineering, Vol. 50, Pp. 106-116, (2013).
https://doi.org/10.1016/j.soildyn.2013.02.014
[10] H. Alielahi, M. Rabeti Moghadam, "Fragility curves evaluation for broken-back block quay walls", Journal of Earthquake Engineering, Vol. 21, No. 1, Pp. 1-22, (2017). https://doi.org/10.1080/13632469.2016.1142487
[11] Y. Jafarian, M. Miraei, "Scalar-and vector-valued fragility Analyses of gravity quay wall on liquefiable soil: Example of Kobe port", International Journal of Geomechanics, Vol. 19, No. 5, p. 04019029, (2019).
https://doi.org/10.1061/(ASCE)GM.1943-5622.0001382
[12] P. MarCom, Seismic design guidelines for port structures, in Working Group, No. 34, (2001).
[13] R. M. Cosentini, F. Bozzoni, "Fragility curves for rapid assessment of earthquake-induced damage to earth-retaining walls starting from optimal seismic intensity measures", Soil Dynamics and Earthquake Engineering, Vol. 152, P. 107017, (2022). https://doi.org/10.1016/j.soildyn.2021.107017
[14] M. Pellissetti, M.-C. Robin-Boudaoud and P. Gehl, "Seismic Fragility Analysis Based On Vector-Valued Intensity Measures; Theory And Application To Fuel Assembly Grids", 30th International Conference Nuclear Energy for New Europe (NENE2021), (2021).
[15] S. Ilbagitaher, H. Alielahi, "Seismic fragility assessment of shored mechanically stabilized earth walls", Geomechanics and Engineering, Vol. 36, No. 3, pp. 277-293, (2024), (2024).
https://doi.org/10.12989/gae.2024.36.3.277
[16] S. ichiro Fukushima, T. Hayashi, "Seismic risk analysis utilizing the PGA and PGV simultaneously as ground motion measures", 20th International Conference on Structural Mechanics in Reactor Technology (SMiRT), Finland, August 9-14, (2009).
[17] A. Shafieezadeh, "Seismic vulnerability assessment of wharf structures", Georgia Institute of Technology, UMI Number. 3484138, (2011).
[18] F. Mollaioli, S. Bruno, L. Decanini and R. Saragoni, "Correlations between energy and displacement demands for performance-based seismic engineering", Pure and Applied Geophysics, Vol. 168, pp. 237-259, (2011).
[19] H. Alielahi, M. Rahimi, Geotechnical Earthquake Engineering, Principles and Practice ACECR Publication, AmirKabir University of Technology Branch, (2021) (In Persian).
[20] Z. Hong-wei, "Comparison of dynamic characteristics between netted and packaged reinforced soil retaining walls and recommendations for seismic design", Chinese Journal of Geotechnical Engineering, Vol. 34, No. 11, pp. 2072-2080, (2012).
[21] C.-C. Huang, S.-H. Wu and H.-J. Wu, "Seismic displacement criterion for soil retaining walls based on soil strength mobilization", Journal of geotechnical and geoenvironmental engineering, Vol. 135, No. 1, pp. 74-83, (2009). https://doi.org/10.1061/(ASCE)1090-0241(2009)135:1(74)
[22] J. Kuwano, Y. Miyata and J. Koseki, "Performance of reinforced soil walls during the 2011 Tohoku earthquake", Geosynthetics International, Vol. 21, No. 3, pp. 179-196, (2014). https://doi.org/10.1680/gein.14.00008
[23] J. Zhang, J. Feng, S. Xiao and C. Liu, "Discussions on two key technical problems for seismic design of retaining structures", Journal of Southwest Jiaotong University, Vol. 22, No. 3, pp. 321-326, (2009).
[24] R. R. Berg, B. R. Christopher and N. C. Samtani, Design of mechanically stabilized earth walls and reinforced soil slopes, FHWA, Washington DC, Report No. FHWANHI-10-024, (2009).
[25] R. A. Imbsen, AASHTO guide specifications for LRFD seismic bridge design. AASHTO, (2009).
[26] G. Yang, C. Xu, and M. Zhang, "Geosynthetics reinforcement soil structure application guidance", 1st ed.; China Communications Press Co. Ltd.: China, Beijing, pp. 35–42, (2016).
[27] PWRC, Technical Report for PWRC Certification of Construction Material, Products and Technique: Geogrid Tensar, Public Works Research Center, Tsukuba, Ibaraki, Japan (p.149), (2005) (In Japanese).
[28] B. S. Institution, "Code of Practice for Strengthened/reinforced Soils and Other Fills: BS 8006-1: 2010", BSi, (2010).
[29] WSDOT, "2005 Annual State Highway Collision Data Summary", Washington State Department of Transportation, (2006).
[30] S. Li, X. Cai, L. Jing, H. Xu, X. Huang and C. Zhu, "Lateral displacement control of modular-block reinforced soil retaining walls under horizontal seismic loading", Soil Dynamics and Earthquake Engineering, Vol. 141, P. 106485, (2021). https://doi.org/10.1016/j.soildyn.2020.106485
[31] F. Itasca, "FLAC-Fast Lagrangian Analysis of Continua, "Version. 8.0, in, Itasca Consulting Group, lnc, ed: Minneapolis, (2016).
[32] M. Yazdandoust, "Investigation on the seismic performance of steel-strip reinforced-soil retaining walls using shaking table test", Soil Dynamics and Earthquake Engineering, Vol. 97, Pp. 216-232, (2017).
https://doi.org/10.1016/j.soildyn.2017.03.011
[33] V. Elias, B. R. Christopher and R. R. Berg, Mechanically stabilized earth walls and reinforced soil slopes: design and construction guidelines (updated version), United States. Federal Highway Administration, (2001).
[34] J. Li, X. Li, M. Jing and R. Pang, "Numerical Limit Analysis of the Stability of Reinforced Retaining Walls with the Strength Reduction Method", Water, Vol. 14, No. 15, P. 2319, (2022).
https://doi.org/10.3390/w14152319
[35] F. Schlosser, "Friction in reinforced earth", in ASCE, Convention, (1978).
[36] N. Norme, "NFP 94‐220‐2", Ouvrages en sols rapportés renforcés par armatures ou nappes peu extensibles et souples‐Renforcement par des armatures métalliques en treillis‐Justification du dimensionnement, (1998).
[37] A. Abdelouhab, D. Dias and N. Freitag, "Numerical analysis of the behaviour of mechanically stabilized earth walls reinforced with different types of strips", Geotextiles and Geomembranes, Vol. 29, No. 2, pp. 116-129, (2011). doi.org/10.1016/j.geotexmem.2010.10.011
[38] Y. Jiang, J. Han, J. Zornberg, R. Parsons, D. Leshchinsky and B. Tanyu, "Numerical analysis of field geosynthetic-reinforced retaining walls with secondary reinforcement", Géotechnique, Vol. 69, No. 2, pp. 122-132, (2019). https://doi.org/10.1680/jgeot.17.P.118
[39] C. Fan, H. Liu, J. Cao and H. I. Ling, "Responses of reinforced soil retaining walls subjected to horizontal and vertical seismic loadings", Soil Dynamics and Earthquake Engineering, Vol. 129, p. 105969,(2020).
https://doi.org/10.1016/j.soildyn.2019.105969
[40] R. K. Row, G. D. Skinner, "Numerical analysis of geosynthetic reinforced retaining wall constructed on a layered soil foundation", Geotextiles and geomembranes, Vol. 19, No. 7, Pp. 387-412, (2001).
https://doi.org/10.1016/S0266-1144(01)00014-0
[41] K. Hatami, R. Bathurst, "Effect of structural design on fundamental frequency of reinforced-soil retaining walls", Soil Dynamics and Earthquake Engineering, Vol. 19, No. 3, Pp. 137-157, (2000).
https://doi.org/10.1016/S0267-7261(00)00010-5
[42] K. Mackie and B. Stojadinović, "Probabilistic seismic demand model for California highway bridges", Journal of Bridge Engineering, Vol. 6, No. 6, Pp. 468-481, (2001). https://doi.org/10.1061/(ASCE)1084-0702(2001)6:6(468)
[43] N. Shome, C. A. Cornell, P. Bazzurro and J. E. Carballo, "Earthquakes, records, and nonlinear responses", Earthquake spectra, Vol. 14, No. 3, Pp. 469-500, (1998). https://doi.org/10.1193/1.1586011
[44] C. Kircher et al., Evaluation of the FEMA P-695 methodology for quantification of building seismic performance factors, (2010).
[45] M. Adampira, H. Alielahi, M. Panji, and H. Koohsari, "Comparison of equivalent linear and nonlinear methods in seismic analysis of liquefiable site response due to near-fault incident waves: a case study", Arabian Journal of Geosciences, Vol. 8, Pp. 3103-3118, (2015).
[46] P-2082-1, F. (2020). NEHRP recommended seismic provisions for new buildings and other structures.
[47] PERR. (2021). PEER strong ground motion databases. Pacific Earthquake Engineering Research Center. Available: https://peer. berkeley. edu/peer-strong-ground-motion-databases (accessed Sep. 10, 2021).
[48] A. Haldar, S. Mahadevan, Reliability assessment using stochastic finite element analysis. John Wiley & Sons, (2000).
[49] R. E. Walpole, R. H. Myers, S. L. Myers, and K. Ye, Probability and statistics for engineers and scientists. Macmillan New York, (1993).
[50] W. W. Hines, D. C. Montgomery, and D. M. G. C. M. Borror, Probability and statistics in engineering. John Wiley & Sons, (2008).
[51] N. Luco and C. A. Cornell, "Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions", Earthquake Spectra, Vol. 23, No. 2, Pp. 357-392, (2007).
