- Alizadeh, M., Minaei, S., Tavakoli, T., & Khoshtaghaza, M. (2006). Effect of de-awning on physical properties of paddy. Pakistan Journal of Biological Sciences, 9(9), 1726-1731. https://doi.org/10.3923/pjbs.2006.1726.1731
- ANTAM. (2017). Asian and Pacific Network for Testing of Agricultural Machinery. https://www.un-csam.org
- Awika, J. M. (2011). Major cereal grains production and use around the world Advances in cereal science: implications to food processing and health promotion (pp. 1-13): ACS Publications. https://doi.org/10.1021/bk-2011-1089.ch001
- Brown, K., Turner, F., Thomas, J., Deuel, L., & Keener, M. (1977). Water balance of flooded rice paddies. Agricultural Water Management, 1(3), 277-291. https://doi.org/10.1016/0378-3774(77)90006-3
- Chandrasekhararao, C., Jitendranath, S., & Murthy, T. (2013). Resource optimisation in rice through direct seeding by drum seeder. International Journal of Agriculture and Food Science Technology, 4(3), 239-246.
- (2020). Food and Agricultural Organization Statistical Yearbook. https://doi.org/10.4060/cb1329en
- Farahmandfar, R., Farahmandfar, E., & Ramezani, A. (2009). Physical properties of rough rice. International Journal of Food Engineering, 5(5). https://doi.org/10.2202/1556-3758.1573
- Farooq, M., Wahid, A., Lee, D. J., Ito, O., & Siddique, K. H. (2009). Advances in drought resistance of rice. Critical Reviews in Plant Sciences, 28(4), 199-217. https://doi.org/10.1080/07352680902952173
- Ghanbarian, D., Valaei, M., Ghasemi Varnamkhasti, M., & Aghagoolzade, H. (2017). Discussion of Influence of parboiling in milling rice yield and head rice yield. Iranian Journal of Biosystems Engineering, 48(2), 299-304. https://doi.org/10.22059/ijbse.2017.62471
- Gutaker, R. M., Groen, S. C., Bellis, E. S., Choi, J. Y., Pires, I. S., Bocinsky, R. K., Slayton, E. R., Wilkins, O., Castillo, C. C., Negrão, S. & Oliveira, M. M. (2020). Genomic history and ecology of the geographic spread of rice. Nature plants, 6(5), pp.492-502. https://www.nature.com/articles/s41477-020-0659-6
- Hafeez, M., Bouman, B., Van de Giesen, N., & Vlek, P. (2007). Scale effects on water use and water productivity in a rice-based irrigation system (UPRIIS) in the Philippines. Agricultural Water Management, 92(1-2), 81-89. https://doi.org/10.1016/j.agwat.2007.05.006
- Hosseini, S. M., & Loghavi, M. (2009). Design, Development and Evaluation of a Paper-Pot Transplanter. Iranian Journal of Biosystems Engineering, 40(1). https://dor.isc.ac/dor/20.1001.1.20084803.1388.40.1.1.3
- Javidan, S. M., & Mohammad zamani, D. (2019). Design, Construction and Evaluation of Semi-Automatic Transplanter with Conical Distributing Cups. Agricultural Mechanization and Systems Research, 20(72), 179-190. https://doi.org/10.22092/erams.2019.120477.1239
- Mohammadzamani, D., Ghezavati, J., & Nazari, M. (2015). Designing manufacturing and evaluation of automated tomato planter. Journal of Agriculture Mecanization,16(65), 79-92. https://doi.org/10.22092/erams.2016.105955
- Pandey, S., & Velasco, L. (1999). Economics of alternative rice establishment methods in Asia: a strategic analysis. Social Sciences Division Discussion Paper, International Rice Research Institute, Los Banos, Philippines, 1(1), 12-18.
- Pandey, S., & Velasco, L. (2002). Economics of direct seeding in Asia: patterns of adoption and research priorities. Direct seeding: Research strategies and opportunities, 3-14.
- Pandey, S., & Velasco, L. (2005). Trends in crop establishment methods in Asia and research issues. Rice is life: Scientific perspectives for the 21st century, 178-181.
- Popov, P. (1976). Mechanics of materials Popov. 2th edition. Chapter 2, paper 131-141.
- Rabbani, G., & Ali, M. (2009). New ideas and concepts, rice bran: a nutrient dense mill-waste for human nutrition. The ORION Medical Journal, 32(3), 694-701.
- Rao, A., Johnson, D., Sivaprasad, B., Ladha, J., & Mortimer, A. (2007). Weed management in direct‐seeded rice. Advances in agronomy, 93, 153-255. https://doi.org/10.1016/S0065-2113(06)93004-1
- Reddy, P. B. H., Sreenivasulu, S., & Manohar, C. (2009). Direct Seeding with Drum Seeder–Future Prospects. RASS–Acharya Ranga Krishi Vigyan Kendra, Tirupati, AP.
- Singh, S., Sharma, S., & Prasad, R. (2001). The effect of seeding and tillage methods on productivity of rice–wheat cropping system. Soil and Tillage Research, 61(3-4), 125-131. https://doi.org/10.1016/S0167-1987(00)00188-4
- Singh, Y., Singh, G., Johnson, D., & Mortimer, M. (2005). Changing from transplanted rice to direct seeding in the rice-wheat cropping system in India. Rice Is Life: Scientific Perspectives for the 21st Century” (K. Toriyama, KL Heong, and B. Hardy, Eds.), 198-201.
- Spotts, F., Shob, T. A., & Horen Berger, L.A., (2004). Design of machine elements, 8th ed, chapter 4, paper 311-314. https://doi.org/10.1115/1.1637657
- Usefian, M., Arabzade, B., Soodaee Mashaee, S., & Mohammadi Nesheli, Y. (2014). Evaluation of different levels of Irrigation on yield and qualitative properties of two rice varieties. Agronomy Journal (Pajouhesh & Sazandegi), 27(104), 69-75. https://doi.org/10.22092/aj.2014.101680
- Vinay, M., Kumar, U., Parkash, V., & Kumari, S. (2016). Impact of direct seeded rice on economics of paddy crop in Haryana. International Journal of Agriculture Sciences, 8(62), 3525-3528.
|
