Developing probiotic bread using Lactobacillus reuteri part 2: Evaluation of fluidized bed double microencapsulation on thermal stability of Lactobacillus reuteri

مجله پژوهشهای علوم و صنایع غذایی ایران

Article 6, Volume 14, Issue 1 - Serial Number 49, March and April 2018, Pages 93-106   

Document Type: Research Article

DOI: 10.22067/ifstrj.v1396i0.56866

Authors

Layla Zaghari¹; Alireza Bassiri^{* 2}; Somaye Rahimi²; Ali Zonousi³

¹Student of Food Science and Technology, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran.

²Food Technology and Processing Faculty, Department of Chemical Technologies, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran.

³Biosystems Engineering Faculty, Department of Agricultural Research, Iranian Research Organization for Science and Technology (IROST), Tehran, Iran.

Abstract

Intoduction: Probiotic products have been used worldwide in the last decades. They are significantly gaining popularity and their consumption is associated with increasing levels of health-consciousness. Probiotics can be defined as microbial cells that have a beneficial effect on the health and wellbeing of the host. In this sense different probiotic products have appeared on the market with different formulations and applications. Bread is the major type of bakery products and a staple food in most part of the world. Despite attempts to develop functional breads containing viable microorganisms, this has not been fully developed yet because of the high temperature during baking process. Viability of probiotic bacteria in the product at the point of consumption is an important consideration for their efficacy, as they have to survive during the processing and shelf life of food. Lactobacillus reuteri which naturally occurs in the human intestine possess probiotic properties with good colonization potential. The main purpose of probiotic encapsulation is to protect cells against an unfavorable environment, include high processing temperatures and storage. The fluid bed encapsulation process consists of spraying a coating solution into a fluidized bed of solid particles. After several cycles of wetting–drying, a continuous film is formed. The main parameters affecting the process are flow-rate and pressure of the spraying liquid, composition and rheology of the coating solution, flow-rate and temperature of the fluidizing air. Double microencapsulation for probiotics by air-suspension fluidized-bed coating is a good alternative method to achieve greater resistance to high temperatures during bread baking. The aim of this study was to evaluate the survival of Lactobacillus reuteri that had been double layered using chitosan, calcium chloride and Arabic gum for microencapsulation and which had been exposed to bread baking conditions.

Materials and Methods: Pure freeze-dried Lactobacillus reuteri PT-1655 were obtained from Persian Type Culture Collection (Tehran, Iran) and were activated by inoculation in the MRS broth at 37°C for 36-48 h. The air-suspension process was performed in a Wurster coater system with a bottom spraying atomizer. In various pretests, the fluidization pressure, the atomization pressure and the spraying rate of the microencapsulation process were varied to examine their influence on process conditions, especially on the particle development. In this study, chitosan, calcium chloride and Arabic gum at concentrations (0.5, 1 and 1.5% w/v), 5% w/v and (1.5, 3 and 6% w/v) were used as second layer in double microencapsulation, respectively. Heat resistance of unencapsulated and double encapsulated microorganisms was determined by placing in an oven which was preheated to 80°C for 15 and 30 minutes. The prepared dough after adding of unencapsulated and double encapsulated bacteria was shaped into loaves of 50 g each, placed in aluminum pans, and baked in a preheated oven at 180°C for 20 min and 70 – 80% relative humidity and then cooled at room temperature. The temperature during baking process was checked by putting a thermocouple at the crumb center. The viability of bacteria at controlled conditions was measured after 1 and 24 h after baking process. Experimental data have been represented as the mean with standard deviation (SD) of different independent determinations. The significance of differences was evaluated by analysis of variance (ANOVA). Differences were considered statistically significant at p

Keywords

Lactobacillus reuteri; double microencapsulation; fluidized bed coater; thermal stability; probiotic bread

References

زاغری، ل. ، بصیری، ع.، رحیمی، س. و زنوزی، ع. بکارگیری لاکتوباسیلوس‌روتری در تهیه نان پروبیوتیک بخش 1: ارزیابی فرآیند ریزپوشانی به روش بسترشناور بر زنده‏مانی لاکتوباسیلوس‌روتری در شرایط شبیه‏سازی شده معده. پژوهش‏های علوم و صنایع غذایی ایران. در دست چاپ.

گنجوری، م .، محرابیان، ص.و اخوان سپهی ، ع .، 1391، غنی‎سازی نان‎های حجیم با باسیلوس های بالقوه پروبیوتیک (باسیلوس کواگولانس). مجله زیست فناوری دانشگاه تربیت مدرس، دوره 3، شماره 1، صفحه 38

Anal, K.& Singh, H., 2007, Recent advances in microencapsulation of probiotics for Industrial applications and targeted delivery. Trends in Food Science & Technology, 18: 240-251.

Behzadi, S., Shengqian, W., Toe gel, S., Hofrichter, M., Altenburger, I., Unger, F., Wirth, M.& Viernstein, M., 2013, Impact of heat treatment and spray drying on cellular properties and culturability of Bifidobacterium bifidum BB-12. Food Research International ,54: 93–101.

Burgain, C., Gaiani, M., Linder, J.& Scher, M., 2011, Encapsulation of probiotic living cells: From laboratory scale to industrial Applications. Journal of Food Engineering. 104: 467–483.

Capela, P., 2006, Use of cryoprotectants, prebiotics and microencapsulation of bacterial cells in improving the viability of probiotic organisms in freeze-dried yoghurt. in School of Molecular Science. Victoria (Australia) University, 158.

Chandramouli, V., Kailasapathy, K., Peiris, P.& Jones, M., 2004, An improved method of microencapsulation and its evaluation to protect Lactobacillus spp in simulated gastric conditions. Journal of Microbiological Methods. 56: 27-35.

Chavarri, M., Marañon, I., Ares, R., Ibanez, F.C., Marzo, F.& Villaran, M.C., 2010, Microencapsulation of a probiotic and prebiotic in alginate-chitosan capsules improves survival in simulated gastro-intestinal conditions. International Journal of Food Microbiology, 142: 185–199.

Cook, M.T., Tzortzis, G., Charalampopoulos, D.& Khutoryanskiy, V., 2011, Production and evaluation of dry alginate-chitosan microcapsules as an enteric delivery vehicle for probiotic bacteria. Biomacromolecules, 12: 2834-2840.

Desai, K. G. H.& Park, H. J., 2005., Recent developments in microencapsulation of food ingredients. Drying Technology, 23 (7): 1361-1394.

Desmond, C., Ross, E., O'Callaghan, G.& Fitzgerald, C., 2002, Improved survival of Lactobacillus paracasei NFBC 338 in spray-dried powders containing gum acacia. J. Appl. Microbiol, 93: 1003–1011.

Ekbeck, J.& Hakanson, E., 2012, Termostable lactobacillus strains. Patent, US8137952.

Fareeza, b., Ismail, M., Siong Meng Lima, b., Rakesh, K., Mishra, c.& Kalavathy Ramasamya, b.,2015, Chitosan coated alginate–xanthan gum bead enhanced pH andthermotolerance of Lactobacillus plantarum LAB12. International Journal of Biological Macromolecules,72: 1419–1428.

Fortoul, R.& Terrazas, A., 2012, Viability of some probiotic coatings in bread and its effect on the crust mechanical properties. Food Hydrocolloids, 29: 166-174.

Kearney, N., Meng, X.C., Stanton, C., Kelly, J., Fitzgerald, G. F.& Ross, R., 2009, Development of a spray dried probiotic yoghurt containing Lactobacillus paracasei NFBC 338. International Dairy Journal. 19(11): 684-689.

Lima, C., Kruger, M., Destro, M.& Landgraf, M., 2009, Evaluation of culture media for enumeration of Lactobacillus acidophilus, Lactobacillus casei and Bifidobacterium animalis in the presence of Lactobacillus delbrueckii subsp bulgaricus and Streptococcus. Food Science and Technology, 42: 491-494.

Mandal, S., Puniya, A.K.& Singh., K.., 2006, Effect of alginate concentration on survival of microencapsulated Lactobacillus casei. Int Dairy J, 16: 1190–1195.

Michael, T.& Vitaliy, V., 2010, Production and evaluation of alginate-chitosan microcapsules as an enteric delivery vehicle for probiotic bacteria. Journal of Microbiological Methods, 100:145-146.

Min Kyeong, Cha., Myung Jun, Chung., Jin Eung Kim, Kang Oh Lee. & Nam Joo Ha.,2011, Comparison of Dual Coated (Duolac™) and Uncoated Lactic Acid Bacteria from

Potential Probiotics. Biotechnology & Biotechnological Equipment, 25:3, 2489-2493.

Mosilhey, S.H., 2003, Influence of Different Capsule Materials on the Physiological Properties of Microencapsulated Lactobacillus Acidophilus This work has been done at the Department of Food Technology. University of Bonn, Germany.

Phoem, N., Chanthachum, S.& oravuthikunchai, P., 2015, Preparation of Eleutherine americana-Alginate Complex Microcapsules and Application in Bifidobacterium longum. Nutrients. 7: 831-848.

Qi, x., Jn, Y.& Liu, H., 2011, Microencapsulation of lactobasillus brevis and preliminary evalution of their therapeutic effect on the diarrhaea of neonatal calf. Journal of animal and veterinary advances, 10(2): 151-156.

Rosell, C., 2007, Vitamin and mineral fortification of bread. Technology of functional cereal products. Cambridge, UK: Woodhead Publishing Ltd.

Sabikhi, L., Babu, R., Thompkinson, D. K.& Kapila, S., 2010, Resistance of Microencapsulated Lactobacillus acidophil LA1 to Processing Treatments and Simulated Gut ConditionsFood. Bioprocess Technol, 3: 586–593.

Semyonov, D., Ramon, O., Kovacs, A., Friedlander, L.& Shimoni, E., 2014, Air-Suspension Fluidized-Bed Microencapsulation of Probiotics. Drying Technology: An International Journal. 30(16): 1918-1930.

Solanki, H., Dipak, D., Dushyant, A., Vipul, D., Girish, K. & Akil, M., 2013, Development of Microencapsulation Delivery System for Long-Term Preservation of Probiotics as Biotherapeutics Agent. BioMed Research International, 620719, 21.

Soukoulis, C., Yonkers, L., Gann, H., Behboudi-Jobbehdar, S., Parmenter, C.& Fisk, I., 2014, Probiotic edible films as a new strategy for developing functional bakery products: The case of pan bread. Food Hydrocolloids, 39: 231-242

Talebzadeh, S., Sharifan, A., Ghiassi Tarzi, B.& Ezzat panah, H., 2014, Assessment the possibility of probiotic jelly production using microencapsulation technique of Lactobacillus acidophilus bacteria. International Journal of Biosciences. IJB, 5(1): 143-154.

Zhou, Y., 1988, Spectrophotometric quantification of lactic bacteria in alginate and control of cell release with chitosan coating. Journal of Applied Microbiology, 84: 342-348.

Zorea, Y.& penhasi, A., 2012, Heat resistant probiotic compositions and healthy food comprising them. EP, 2451300 A1